Examples of 'μl' in a sentence
Meaning of "μl"
μl (noun) - symbol for microliter, a unit of volume equal to one millionth of a liter
How to use "μl" in a sentence
Basic
Advanced
μl
Results were expressed as number of bacterial cells per μL.
A 1 μl gas chromatography microsyringe with hardened needle.
Total volume μl.
As little as 1 μL needed for size analysis.
One whole is dedicated to the molecular weight marker 5 μl.
The injection volume was 1 μL in splitless mode.
Pipette 1 μl of the staining solution into each single tube.
Analysis of lactate only requires 5 μl of blood.
Inject 1 μl of silylated sample solution and measure peak areas.
Allowed residual liquid volume not more than 2 μl in plate well.
Injections of 2 μL were made in splitless mode.
It requires a small sample size of < 1 μL for water.
It should not be larger than 10 μl except for light scattering and viscosity detectors.
Required sample is approximately 10 μl per one item.
Inject 20 μl of each calibration solution several times and determine the mean peak heights areas.
See also
Apply separately to the strip 2 μl to 3 μl of each solution.
Inject a 10 μl aliquot of the solution of purified oil in acetone 5.
The required reagent and sample volume is 50 μl only.
As a negative control, 10 μl of sterile demineralized water was used.
Reactions were carried out in a total volume of 20 μl.
Approximately 75 μL of blood was collected into a heparinized capillary tube.
Its venom glands store only about 10 μl of crude venom.
Inject 1 μl of each sample solution.
An injection volume was 5 μl.
Inject 1 μl of silylated standard solution (stigmasterol or sitosterol) and adjust the integrator calibration parameters.
Dissolve the purified DNA in 15 μL of distilled water.
Add 50 μl blocking buffer to Mab control wells.
Amount of substance injected: 1 μl of TMSE solution.
The DNA was eluted in a final volume of 50 μL.
The DNA is eluted in a 50 μl of DNase and RNase free water.
Each PCR reaction was performed using a final volume of 25 μL.
DNA extraction was performed using 200 μL of total peripheral blood.
HPLC equipment with injection system, suitable for injecting volumes of 20 μl.
Mix well and add 100 μl protein A-conjugate to all wells except the substrate control wells.
Carefully open the QIAamp Spin Column and add 100 μl of distilled water.
Transfer 100 μl of the supernatant to a fresh tube.
The wells can hold sample volumes of 2 μl to 30 μl.
Add 50 μl to all wells of the plate.
Only at volume not exceeding 15 μl solvent naphtha/kg bw.
Reusable 200 μL micropipette always included in the kit.
Blood volumes range from 5 to 15 μl depending on fish size.
A 10 μl sample was injected through an auto-sampler.
Rheodyne injector valve with a 10 μL loop.
Typically, 300 μl of cell suspension should remain in the tube.
The final reaction mixture volume was 25 μl.
The flow rate was held at 1 ml / min and 10 μL injections were made.
Vg voretigene neparvovec in a total volume of 300 μL.
For each slide (containing 2 different samples in duplicate) 90 μl hybridisation solution is required.
They reported that fumigation with ozone at 200 μL.
Dispense 100 μL culture medium into the peripheral wells of a 96-well tissue culture microtiter plate blanks.
