Examples of 'abrasive disc' in a sentence
Meaning of "abrasive disc"
An abrasive disc is a tool or accessory used in various industries for grinding, sanding, or polishing surfaces. It is typically made of abrasive materials such as sandpaper or diamond particles bonded to a disc-shaped substrate. Abrasive discs are commonly used in metalworking, woodworking, and automotive applications
Show more definitions
- A disc of abrasive material that rotates in a tool such as a sander.
How to use "abrasive disc" in a sentence
Basic
Advanced
abrasive disc
Installing or removing abrasive disc optional accessory.
Do not apply side pressure to the abrasive disc.
Premium abrasive disc for cutting metals.
Do not use excessively oversized abrasive disc.
Do not use abrasive disc or diamond cutting wheels.
Disconnect tool when changing belt or abrasive disc.
Then attach the abrasive disc to the.
Unplugged before installing or removing the abrasive disc.
Make sure abrasive disc is not contacting the.
Be sure to feed water to the abrasive disc during.
Make sure abrasive disc or wool bonnet is not.
The benefits of the inventive abrasive disc are manifold.
Attach abrasive disc to aluminum disc.
Never run the tool without the abrasive disc.
A two sided abrasive disc with intermediate member.
See also
It is easy to change the standard grinding head or abrasive disc.
Lift the abrasive disc at any point along its.
This essentially renders the coated abrasive disc inoperable.
Make sure the abrasive disc or the wheel is not.
Result in poor performance and premature wear to the abrasive disc.
Attach the abrasive disc on the center of the pad.
Rotary motion can be generated by attaching an abrasive disc to a rotary tool.
Remove old abrasive disc by peeling it from aluminum disc.
Be careful to align the holes in the abrasive disc with those in the pad.
Place the abrasive disc on the spindle and inner flange a.
Ensure that the holes in the new abrasive disc align with the.
An abrasive disc test sample was held to the backup pad by a retainer plate.
Mount the fibre backed abrasive disc on the backing pad.
Excessive pressure will result in poor performance and premature wear to abrasive disc.
Select the proper abrasive disc and apply to aluminum disc.
Apply the sander lightly to the work and allow the abrasive disc to cut.
Ten pounds of weight hold the abrasive disc on the workpiece during sanding.
Use an abrasive disc with a backing pad for sanding with your angle grinder.
Simply grip the edge of the abrasive disc and gently peel it.
The abrasive disc moves fastest and removes more material at the outer edge.
Turn the tool on and then apply the abrasive disc to the workpiece.
Select a suitable abrasive disc and make sure that it is fixed securely to the tool.
Pay attention that the pad is placed inside of the edge of the abrasive disc.
Remove the tightening nut and the abrasive disc from the tightening shaft.
Use a rigid abrasive disc with a depressed centre for surface grinding and finishing.
Gently apply more pressure to engage the rotating abrasive disc onto the work surface.
Use an abrasive disc with the backing pad for sanding with your angle grinder.
Sanders typically require a support pad having a surface to which the abrasive disc will be mounted.
Abrasive disc sanding is well suited for finishing small flat surfaces and convex edges.
The workpiece could be drawn into the space between the abrasive disc and the table.
The abrasive disc was replaced with a new abrasive disc after every third sanding cycle.
Installing or removing the abrasive disc Fig.
Installing abrasive disc Remove all dirt or foreign matter from the pad.
Installing and removing abrasive disc Fig.
The coated abrasive disc and back up pad assembly was installed on a Schiefer testing machine.
You'll also be interested in:
Examples of using Disc
Show more
Failed to play the disc is incorrectly inserted
The disc is rotating but no picture is produced
A poorly manufactured disc may not be playable
Examples of using Abrasive
Show more
Do not use abrasive cleansers or scouring pads
Do not use solvents or other aggressive or abrasive
Do not use abrasive cleaners or scouring pads
