Examples of 'absorption value' in a sentence
Meaning of "absorption value"
absorption value: Absorption value usually refers to the amount of a particular substance that is absorbed by something else
How to use "absorption value" in a sentence
Basic
Advanced
absorption value
The silica is further characterized by a high absorption value.
Measured absorption value.
This value is referred to as the water absorption value.
Corrected absorption value.
A higher hydrophobic degree may be associated with a higher oil absorption value.
The oil absorption value can be determined from the following equation.
Certain fullerenes may offer a different absorption value at the same concentration.
The absorption value can be used to predict the board behaviour under severe conditions.
The samples were considered positive when the absorption value was higher than the cutoff.
The absorption value fulfils the following equation,.
The pore volume corresponds to a g / g absorption value.
Moreover, an absorption value sufficient to generate heat must be respected.
The structure can usually be evaluated by an absorption value of dibutyl phthalate ( DBP ).
The oil absorption value is calculated as follows, EPMATHMARKEREP.
The glass flakes produced in this way have an oil absorption value of 85.
See also
Calculation of the oil absorption value was done as follows, EPMATHMARKEREP.
Similarly, the low-capacity oil absorption phase has a low-capacity oil absorption value.
Dye 2 has a larger absorption value k than dye 1.
Absorption value ( ABS ), a sample is weighed before and after the water exposure.
The grades were required to show an absorption value of less than 0.5 % to be acceptable.
Sound absorption value up to 49 dB at 7 mm space to the floor.
Accordingly, the U / F polymer particles have an oil absorption value of at least 40.
Samples that give an absorption value of less than 0.08 are deemed to be calcium tolerant.
The water absorption value measured by Brabender ® Farinograph ® of the refined wheat flour is 53 %.
Farinograph water absorption value minus 4 % is mostly used . Procedure.
The shock absorption value obtained in this case was of the order of 3.2 %.
Maximum absorption value ( Amax ) for each sample.
Oil absorption value ( OAV ) is expressed as, EPMATHMARKEREP.
Alkyd A had an oil absorption value of 78, while alkyd B had an oil absorption value of 65.
You'll also be interested in:
Examples of using Value
Show more
Adjustments of value are recognized in the income statement
Promoting and reinforcing local value systems
Farms and market value of agricultural products
Examples of using Absorption
Show more
Potential for absorption and appropriation required
Biological hazard and organism absorption rate
Potential for absorption of the administrative expenses of
