Examples of 'accessory holder' in a sentence
Meaning of "accessory holder"
accessory holder: An object or device used to store or organize accessories or additional items
How to use "accessory holder" in a sentence
Basic
Advanced
accessory holder
Place accessory holder onto top of handle.
Steam is flowing out of the accessory holder.
Remove the accessory holder to the top.
Stow away the accessories in the accessory holder.
Accessory holder for filters and nozzle.
Snap two accessories into the accessory holder.
Accessory holder module for optical equipment.
You can store two accessories at a time in the accessory holder.
Accessory holder specific types only.
Position the accessories as indicated with the symbols on the accessory holder.
The accessory holder is stored on the hose nozzle.
The accessories may be attached to the accessory holder in the suction hose handle.
Accessory holder from the tube to improve your scope.
Please note how the small nozzle must be placed in the accessory holder.
Pull up the accessory holder and store the accessories as shown.
See also
You can store two accessories in the accessory holder at the same time.
Accessory holder that keeps filters and froth nozzle to hand.
You may refit the other accessory by clicking it into the accessory holder.
You can store accessories in the accessory holder by pushing them into the holder.
Clean any residual debris from the tool shaft and the accessory holder.
Attach the accessory holder to the the telescopic tube and store the accessories on the.
Mark the drill holes on the wall with the aid of the accessory holder t.
Attach the flexible end of the accessory holder at the top of the Vac drum.
Accessory holder in place . u Remove the accessory holder.
Dusting brush Upholstery nozzle Crevice nozzle Accessory holder for the three ac.
Install accessory holder as shown with the 4 screws included.
Figure 2 illustrates the working principle of an accessory holder according to a second embodiment.
Accessory holder with accessories 1 Crevice nozzle.
According to another embodiment, the accessory holder is fully integrated in the nozzle.
When not in use, the accessories can be stored on the accessory holder 22.
Figure 6 shows an accessory holder holding a tray that is itself holding an accessory.
Insert the crevice tool and multi-tool onto the accessory holder as shown.
Figure 7 shows an accessory holder holding a snout that is itself holding two accessories.
Place the telescopic suction tube into the accessory holder on the unit 's feet 6a.
Attach the accessory holder to the suction tube as shownFig . 4.
If no screw head to grommet clearance, the accessory holder will twist with the screws.
Insert the accessory holder 10 from above into the holder on the blower head 9.
Place the two separated vacuum tubes into the accessory holder on the unit's feet 6a.
Push the accessory holder onto the telescopic tube as shown, or onto the handle Fig . 3/A.
Attach accessories temporarily not in use to the accessory holder on the suction tube Fig . 2.
Accessory holder ( specific types only ) 1 Slide the accessory holder with accessories onto the handgrip ‘ click.
Figure 8 shows the positioning of the accessory holder equipped with a snout, with respect to a patient.
Using a long screwdriver, install screws ( part L ) into matching holes on both side of accessory holder.
After cleaning, store the mixing rod in the accessory holder supplied see illustration D.
Hold the accessory holder ( 15 ) as shown and push it off the appliance.
Once clean, place in the accessory holder 2.
The accessory holder can be snapped onto the handgrip Fig . 11.
Insert the separated vacuum tubes ( 12 ) into the accessory holder on the appliance feet 7.
Accessory holder ( specific types only ) 1 Snap the accessory holder onto the handgrip Fig . 22.
Use an optional donut ( model 400DN ) in the accessory holder to enhance pattern projection.
You'll also be interested in:
Examples of using Accessory
Show more
Insert the accessory into the collet
Accessory may kickback over your hand
Summary trial of accessory after the fact
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
