Examples of 'accessory tray' in a sentence
Meaning of "accessory tray"
An accessory tray is a small container or compartment designed to hold various items or accessories. It is commonly used to organize and store small objects such as jewelry, watches, keys, or office supplies. Accessory trays can be found in various settings, including homes, offices, and retail stores
How to use "accessory tray" in a sentence
Basic
Advanced
accessory tray
Flanges fit under accessory tray when attached.
Place nozzle extension in clip on back of accessory tray.
Insert the accessory tray into the tracks as illustrated.
Insert supplied accessories in spaces provided in accessory tray.
Slide the top accessory tray over the central rod.
Place nozzle extension in narrow groove on accessory tray.
Hook provided on back of accessory tray for safely storing safety goggles.
Coil power cord and store on accessory tray.
Place accessory tray over holes on handle viewing from front of unit.
Set up tripod and accessory tray.
Attach accessory tray to handle, then attach handle to.
Place spray gun in wide groove on accessory tray as shown.
Align the accessory tray as shown, and slide back.
Check to ensure that all accessories are in the accessory tray.
Place spray gun through hole on accessory tray on right side of unit.
See also
Store ProjectPro nozzles in holder provided on the accessory tray.
A small water level on the accessory tray can help you position your tripod horizontally.
Store spray tips in holder provided on the accessory tray.
Properly assembled, the accessory tray should appear as pictured above.
Coil high pressure hose on hose wrap provided on accessory tray.
The accessory tray is secured to the base 2 by two or four screws.
Tighten the locking knobs to secure the accessory tray in place.
Afterwards, put the accessory tray in place and thread tray until snug.
Ensure screws are tight but not crushing plastic accessory tray.
Put the accessory tray on the trolley base unit and screw the fixing caps fig . 4.
Hang high pressure hose on hook attached to accessory tray on left side of unit.
Insert multi-colored spray tips and other supplied accessories in spaces provided in accessory tray.
Spread tripod legs apart so the accessory tray fits underneath 2.
Spread the tripod legs apart to stand the tripod upright and attach the accessory tray.
Place spray gun on hook attached to accessory tray on right side of unit Figure 14.
Repeat to attach the other two hinged arms to the Accessory Tray.
Place rotating brush through hole on accessory tray on right side of unit Figure 13.
Insert multi-colored spray tips in spaces provided in accessory tray.
A built-in accessory tray on the monitor stand further reduces the footprint of this AIO combination.
This figure also shows an accessory tray 3.
The accessory tray / reading rack.
Attach handle to main unit, then attach accessory tray.
Place spray gun through hole on accessory tray on right side of unit Figure 12.
Never place liquids of any type directly on the unit, except in an accessory tray.
Using the accessory tray set screw, attach the accessory tray ( R ) to its mount or housing.
Attach handle to main unit, then attach accessory tray to handle.
D - FoJd Down HandJe -- Handle and accessory tray fold flat atop cold engine for space-saving storage.
Tighten the holder 's lock knob to hold the accessory tray in place.
The tripod accessory tray ( W ) will attach to these flanges.
Place the spray gun, nozzle extension and spray tips in the accessory tray.
Remove the Accessory Tray ( W ), the bag with three small wingnuts and three small screws.
Coil and store power cord, spray gun and accessories on the accessory tray.
H - Accessory Tray -- Providesconvenient storage for standard and optional accessories.
Insert multi-colored ProjectPro nozzles and other supplied accessories in spaces provided in accessory tray.
Install two ( 2 ) screws to secure the accessory tray to the main unit.
