Examples of 'activation temperature' in a sentence
Meaning of "activation temperature"
Activation temperature: The specific temperature required to initiate a particular process or reaction in a scientific or technical context
How to use "activation temperature" in a sentence
Basic
Advanced
activation temperature
Activation temperature switched switched off off.
This temperature range is referred to as an activation temperature.
The activation temperature is particular to each gaseous precursor.
The chill roll is below the activation temperature.
The activation temperature is an intrinsic characteristic of the getter material.
Each getter area has its own activation temperature.
The activation temperature will depend on the pigment being used.
The temperature needed is usually designated as the activation temperature.
Adjustment of activation temperature.
Additional studies were conducted to determine the preferred activation temperature.
The activation temperature decreases if a more stabilized carbocation can be formed.
The coating temperature is generally lower than the activation temperature.
The protective layer diffuses at activation temperature which gives it a temporary effect.
The chill roll temperature is maintained below the activation temperature.
The activation temperature is selected as a function of the intended use of the agglomerates.
See also
Each of the getter areas reacts to an activation temperature that is proper thereto.
The activation temperature of several different getters can then be adjusted in a single structure.
Check the pump startup thermostat or the pump activation temperature setting.
The activation temperature has a remarkable effect on the rheologic properties of the system.
After mixing plasticizing takes place during heating to the activation temperature.
Scientists focused on formulations with higher activation temperature and greater resistance to decomposition.
This activation temperature is reached due to the hot exhaust gases passing across the catalyst.
The high heat resistance benefits are obtained with low activation temperature.
This activation temperature lies above the normal maximum operating temperature of a FT reactor.
Heating the polymeric composition above the activation temperature of the polymeric microspheres.
The activation temperature is greater than or equal to the reaction ( decomposition ) temperature.
The getter material forming the reservoir presents its own activation temperature.
Reduce the activation temperature of the catalyst, and.
It is important to help keep processing temperatures below the activation temperature of the material.
In the method, the activation temperature is greater than or equal to the reaction temperature.
Within the can is a wax that changes phase at the desired activation temperature.
In turn, the activation temperature depends on the location of the one or more catalysts.
The temperature at which the polymerization occurs depends upon the activation temperature of the initiator.
In the method, the activation temperature is generally higher than the reaction temperature.
The evacuation temperature Te is higher than the activation temperature of the getter.
Even more preferably, the activation temperature is effective to substantially eliminate the hydronium cations.
The CBL level can also be controlled by varying the catalyst activation temperature.
However, the activation temperature should be below the melting point of the phosphorescent composition.
The adhesive of this reference showed low activation temperature but only medium heat resistance.
As already indicated supra, a blowing agent decomposes above its activation temperature.
Figure 2 represents the activation temperature profile of the metallocene catalyst system according to the invention.
Polymer composition can also increase the adhesive 's heat activation temperature.
For heat-shrink materials, there will be an activation temperature which will initiate significant heat-activated recovery.
Preferably, the coupling temperature is about the same as the activation temperature.
For heat-shrink laminates there will be an activation temperature which will initiate significant heat-activated recovery.
In the second case, the preheating temperature easily reaches the flux activation temperature.
Figure 3 represents the activation temperature profile of the metallocene catalyst system without Titanium.
As a result, time elapsed until the catalyst reaches its activation temperature is shortened.
Tf Activation temperature of the pressure relief device, ºC.
The adjustment sub-layer is designed to modulate the activation temperature of the getter layer.
You'll also be interested in:
Examples of using Activation
Show more
Push button activation also remains available
It was probably drawn in by the stargate activation at first
Storing several activation files on the server
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
