Examples of 'active low' in a sentence
Meaning of "active low"
active low - This phrase is used in electronics or computing to describe a signal or a circuit that is in its inactive or off state when its input is low or at a logic level of 0
How to use "active low" in a sentence
Basic
Advanced
active low
The reset signals will be active low.
Active low signals indicated by asterisk.
All outputs can be active low or active high.
These active low interrupts occur when a key is pressed.
While the pins are active low.
The outputs were active low and could be registered or combinational.
Both of these signals are active low.
It is an active low pin.
Active low Power supply turn on Active high Power supply turn off.
These signals are all active low.
Are active low throughout.
Both pins are active low.
This signal is active low when the voltage amplifier 80 has been auto-zeroed.
These pins are active low.
Open collector, active low digital signal interface.
See also
This output is active low.
This signal is active low when the ICC 29 is transmitting a message.
By default, the input signals are active low normally high.
An active low hardware reset signal, designated RESET, is driven by the master.
Level active high or active low can be set freely.
The input is triggered with a contact closure to COM, or with an active low signal.
The EPMATHMARKEREP signal is active low indicates that the transmitter is on.
Each BECBG signal will be an element control bus arbiter sourced, active low signal.
A suitable gain clock signal is active low and is approximately 15 microseconds wide.
Open collector NPN transistor, active low.
Both of these signals are active low and are controlled by the CPU 450.
Preferably, the bursts are active low.
The input / output logic is active low negative logic.
An apparatus as claimed in claim 10, wherein the asserted state is an active low state.
The UA509 generates active high and active low pulses per second and per minute.
Note that the interrupt pending bit ( bit 0 ) is active low.
The " " indicates that the signal is an active low logic level signal.
Sub-block 222 is configured to convert an active high signal to an active low signal.
Level of inputs OPEN / CLOSE / STOP, active low or active high.
Polarity Active high * Active low.
Turning to Figure 3b, the circuitry which processes the active low FAULT signal is seen.
Robeco 's Conservative Equities approach comprises a range of active low volatility strategies.
CTS, Data sending prohibition . Active low level.
Signal names ending with " N " denote signals which are active low ( logic 0 ).
Absolute Active high - fsH Active low - fsl.
Deviation Active high - deH Active low - del.
You'll also be interested in:
Examples of using Low
Show more
A low indicator indicates a healthy financial position
I am setting the bar low so we are not disappointed
Low temperatures have an effect on vehicle start up
Examples of using Active
Show more
She had active orthodontic treatment as a teenager
Integral person member active in his environment
It has active community support and acceptance
