Examples of 'add phase' in a sentence
Meaning of "add phase"
Add phase: This phrase is often used in project management or software development to describe a specific stage or step in the process of adding new features or functionality to a product or system. The 'add phase' typically involves gathering requirements, designing, coding, and testing the new additions before they are implemented
How to use "add phase" in a sentence
Basic
Advanced
add phase
Add phase C to the batch and continue to mix.
Change Rayneri to Ekart, using a small blender, add phase F until the microcapsules are even dispersed.
Add phase A into main vessel and begin homogenization.
When batch appears uniform ; add Phase C with homogenization.
Add phase B and then allow to cool to room temperature.
Once solution is homogenous, add Phase B and mix well.
Add phase G and transfer the batch to holding vessel.
Decrease the temperature and add phase C. Mix well to homogenize.
Add phase B and continued mixing until powder dispersed throughout mixture.
Cool down to approx . 40 degrees centigrade under stirring, add phase C and homogenize again.
Add phase B with agitation and mix until clear and uniform.
Step 2, Into a suitable container equipped with a propeller mixer, add phase III ingredients as following,.
Add phase D and mix until uniform.
Allow to cool with stirring and add phase D at 40 ° C.
Add phase C and mix until uniform.
See also
When batch appears uniform ; add Phase C with homogenization and stirring at 45°C.
Add phase D to batch and mix well.
When batch reaches 45C, add Phase C ingredients one by one, while mixing.
Add phase C to the final gel.
Extemporaneously add Phase D in the previous phase under stirring.
Add phase B to phase A while mixing with a propeller until it is homogeneous.
In a separate vessel, add Phase B ingredients and begin heating to 82C while mixing.
Add phase B and repeat the same grinding time as for phase A.
Cool to 70°C and add phase B while mixing with a Rayneri blender.
Add phase C and repeat the same grinding operation as for phase B.
Preparation, mix phase A. Add phase B and stir until completely dissolved, adjust pH value to pH 7.0.
Add phase I to Phase II while slowly mixing with a propeller until the mixture is uniform.
Cool to 35 ° C. Add phase C to the main mixture and mix until a uniform appearance is obtained.
Add phase D ( at ambient temperature ) to the main vessel and mix until homogenized.
Individually add Phase D ingredients in order with sweep at 45°C, mixing well between additions.
Add phase D at room temperature and mix for 5 minutes.
Slowly add phase E ( microcapsules ), mix without scraper.
Add phase C to A+B in several times and mix each time.
Add Phase 2 and mix until uniform.
Add Phase 3 with homogenization.
Add phase B, fully dissolved, then cool to RT.
Add Phase C to the batch under homogenization and homogenize for 15 minutes.
Add phase B to phase A and mix with heat off for 30 min.
Add phase Band stir until completely dissolved, adjust pH value to pH 7.0.
Add Phase V ingredients to the mixture and adjust pH to about 7.35.
Then add phase E and cool the batch mixture of phases A-E to 50°C.
Add Phase C ingredients into Phase ( A+B ) mixture and mix for about 5 minutes.
You'll also be interested in:
Examples of using Phase
Show more
The first phase evolved over millennia
Review of the execution of the design phase
The results of phase two have been amazing
Examples of using Add
Show more
Never add products to the boiler water
As long as they do not add a swimsuit competition
Add the following new packing instructions
