Examples of 'adhesive bond' in a sentence
Meaning of "adhesive bond"
Adhesive bond: An adhesive bond is a connection formed by an adhesive substance to join two surfaces together. It refers to the joining of materials using adhesives like glue, tape, or cement
How to use "adhesive bond" in a sentence
Basic
Advanced
adhesive bond
Plasticizers are used to preserve the adhesive bond.
Allow the adhesive bond to cure according to instructions.
Heating assists curing of the adhesive bond.
The adhesive bond is relatively weak.
This is a prerequisite to achieve an adhesive bond of sufficient strength.
An adhesive bond may be used.
The polymer provides strength to the adhesive bond.
Preferably the adhesive bond is also resistant to oil.
Inhibition of this corrosion helps to retain adhesive bond strength.
Excellent adhesive bond strength.
The polymer component provides the strength to the adhesive bond.
Curing creates an adhesive bond to most porous contacting surfaces.
Immediately after lamination the strength of the adhesive bond was assessed.
The strength of an adhesive bond may be determined in various ways.
Mechanical means can be used to add strength to the adhesive bond.
See also
The seal or bond may be an adhesive bond or a heat seal.
The adhesive bond strength of the tape is critical to reproducible test results.
Pressure is applied to ensure that the adhesive bond is properly formed.
An adhesive bond is applied between the facers and the foam core.
The sealing layer could form an adhesive bond that could be peelable.
A recorded curve shows the force required to break the adhesive bond.
The product combines adhesive bond with mechanical key to concrete.
The holding rail is preferably bonded to the pane via an adhesive bond.
As stated above the adhesive bond possesses excellent peel adhesion.
Tack is measured as the maximum force required in breaking the adhesive bond.
Breaking the adhesive bond provides two separate full width sheets.
There is great reliance therefore on the adhesive bond between the pieces.
The strength of the adhesive bond to composite materials is a function of the surface characteristics.
A squeegee had to be used to apply these films for a more permanent adhesive bond.
The temperature at which an adhesive bond separates completely is measured in each case.
Adhesive bond failure describes the case in which the bond at the interfaz fails.
Disadvantages of the above is that the adhesive bond may become contaminated and fail.
Such tapes are convenient to use but may not provide a sufficiently strong adhesive bond.
It may create an adhesive bond between the fastener and a mating threaded device.
Phosphonates or phosphate functional additives can improve the adhesive bond to the metal substrate.
Panel connections made by adhesive bond to custom extrusions eliminates metalic heat conduction paths.
The creep resistance is a measure of the quality of the adhesive bond between the substrates.
The laser ablation of the adhesive bond may possibly release undesirable chemical byproducts.
Pressure may be applied during such contacting to ensure that a strong adhesive bond is created.
Most preferably the cold seal adhesive bond is so strong that the webs are ruptured.
Different types of acrylic nails are mixed along with powders to form a strong adhesive bond.
Weaker than the adhesive bond between the protective layer and the identification layer.
The interlocking which may then form with the glycoproteins ensures a solid adhesive bond.
The adhesive bond cements the initially provisional deposition of the active solid body or bodies.
The intermeshings which they then form with the glycoproteins provide a solid adhesive bond.
The adhesive bond preferably has relatively low peel and relatively high shear characteristics.
The resulting enhanced compatibility between bond and superabrasive is believed to promote adhesive bond strength.
The connector becomes warm and releases the adhesive bond between the connector and the coil.
The HDL test pad and reagent pad are joined by an EAA copolymer adhesive bond.
A method of making an adhesive bond characterized by comprising,.
You'll also be interested in:
Examples of using Adhesive
Show more
Jeffrey applied adhesive plastic to his window
Adhesive surface only bonds on one side
Transmitter with adhesive tape for affixing
Examples of using Bond
Show more
And in so doing seal a bond of enduring friendship between us
Bond undressed and took a cold shower
The sacred bond of man and bro
