Examples of 'adhesive solution' in a sentence
Meaning of "adhesive solution"
adhesive solution: This phrase refers to a substance that is used to stick or bond materials together. It could be a type of glue or any other sticky substance
How to use "adhesive solution" in a sentence
Basic
Advanced
adhesive solution
Smoothing is carefully done to avoid loss of adhesive solution.
The resulting adhesive solution showed no phase separation.
Treat the ceiling portion with an adhesive solution.
No bleeding of the adhesive solution through the paper was observed.
Preparation of polyisobutylene adhesive solution.
Known amounts of the adhesive solution were weighed into glass bottles.
This is important in view of the stability of the adhesive solution.
The prepared adhesive solution and the drug solution are mixed under stirring.
A safe and ecological adhesive solution.
The resulting adhesive solution showed some crystals after standing at room temperature overnight.
Preparation of acrylic adhesive solution.
The resulting adhesive solution showed numerous crystals after standing at room temperature overnight.
This coating can be obtained by impregnating the wafer in an adhesive solution.
Allowing the adhesive solution to adsorb into and around the beads before drying.
The dried or coalesced resin is then overcoated with an adhesive solution.
See also
Known amounts of TSR adhesive solution were weighed into glass bottles.
Drywall sheets can be attached to the wall with a special adhesive solution.
The adhesive solution prepared in this Comparative Example was transparent without white turbidity or gellation.
Before removing the patch you need to soften the adhesive solution.
Thus, a photochromic adhesive solution was prepared.
The concentrations and activities are per milliliter of final liquid biological adhesive solution.
Adhesive Multiple adhesive solution.
The adhesive solution was then coated onto a polypropylene film using a wire-wound rod.
Previously Araldite was known as a pure epoxy adhesive solution.
It all adds up to an innovative adhesive solution that 's addressing a tough marketplace challenge.
These were then coated with the UV modified adhesive solution.
Thus a pressure-sensitive adhesive solution for forming a plaster layer is obtained.
Coating the filled embossed liner with an adhesive solution and ;.
A pressure-sensitive adhesive solution may be applied directly to a support and dried.
Then, the kernels coated with flavorant and adhesive solution were dried.
Deposing the glyoxal-based adhesive solution between said polarizing film and said protective film ;.
Thus, the desired amount of plasticizer may be readily dissolved in the adhesive solution.
After separation the switchable adhesive solution was washed with 80ml water and left to separate.
The active substance / solvent solution is gradually added to the adhesive solution with mixing.
Acrylic copolymer adhesive solution containing 2-ethylhexyl acrylate N-vinyl pyrrolidone and hexamethyleneglycol dimethacrylate polymer domains.
These disks were submerged in the polymer adhesive solution for about 5 seconds.
The monomer was then uniformly stirred to prepare an ultraviolet-curing type pressure-sensitive adhesive solution.
With elaborate testing procedures, we ensure that our adhesive solution meets your specific requirements.
The mixture was then uniformly stirred to prepare an ultraviolet-curing type pressure-sensitive adhesive solution.
Measured amounts of adhesive solution were placed into 20 mL vials and dried.
Bonding of the lattices Take a 6 ml tube filled with adhesive solution.
The adhesive solution with the additive was diluted to get 2.7 % combined silane and BTPPC concentration.
The other ingredients are, Each patch contains triacetin, and acrylic adhesive solution.
The resulting pressure-sensitive adhesive solution had a silicone polyurea gum to MQ resin weight ratio of 1:1.
A resorcin formalin rubber latex ( RFL ), for example, can be used as the adhesive solution.
The adhesive solution can be applied in a thickness of from 30 to 80 µm.
The upper limit of the heat resistance of the adhesive solution is 80 degrees.
This pressure-sensitive adhesive solution contained 25 % of acrylic copolymer particles.
The adhesive applicator 106 comprises a vessel 92 for holding a liquid adhesive solution.
The contact adhesive solution 51 is cast onto release liner 50 and passed through the drying ovens 20.
You'll also be interested in:
Examples of using Adhesive
Show more
Jeffrey applied adhesive plastic to his window
Adhesive surface only bonds on one side
Transmitter with adhesive tape for affixing
Examples of using Solution
Show more
One proposed solution is sustained livelihood programmes
Find a ripe moment to propose solution or option
There is now a solution to most of these problems
