Examples of 'adjacent blades' in a sentence
Meaning of "adjacent blades"
adjacent blades: In the context of this phrase, it could refer to blades or cutting implements that are positioned next to each other or in close proximity. This term is often used in fields such as engineering, manufacturing, or landscaping
How to use "adjacent blades" in a sentence
Basic
Advanced
adjacent blades
They are placed between two adjacent blades.
The hooks of two adjacent blades are connected in pairs by a rope.
The formations do not extend between adjacent blades.
The shroud segments of adjacent blades of a rotor form a continuous shroud in this case.
Each of the aforementioned marginal regions is located between two adjacent blades.
The adjacent blades are advantageously connected together by a narrow, elastically deformable part.
Blade spacing s is the distance between two similar points on adjacent blades.
The platform 4 is positioned between two adjacent blades 3 and presses against their lateral faces.
Each locking part is preferably configured for the fixing of two adjacent blades.
Each inter-blade damper is fastened to two adjacent blades via two respective ball joints.
Advantageously at least one of the rotors can include openings between adjacent blades.
The grooves 14 of adjacent blades 1 do not lie in line with one another.
The tines remove sliced tissue lodged in the cutting assembly between adjacent blades.
Thus, the laminate attachments 44 linked to two adjacent blades abut against a common holding means.
Theses barrier blades also function as heat sinks for the heaters on adjacent blades.
See also
FIG . 1 is a perspective view of two adjacent blades of a compressor according to the prior art ;.
To correct this, try interchanging two adjacent blades.
The clearances between adjacent blades 18 and 10 are as reduced as possible.
If it is different to apply multiple points, they are applied on multiple adjacent blades.
Thus, between each pair of adjacent blades 30 there may be a plurality of ribs 50.
Two adjacent parts are separated by a narrow gap 32 located between two adjacent blades.
Each elastically deformable blade 58 is separated from the adjacent blades by a slot 60.
This form of retaining member 36 is particularly suitable for anchoring two adjacent blades.
FIG . 2 is a perspective view from below of two adjacent blades 1 a and 1 b.
By lengthening this retaining member 136 anchoring can also be provided for other adjacent blades.
Another problem encountered with such blades 10 is overlapping between adjacent blades i . e.
Tines 72 define a thickness that is preferably slightly less than the thickness between adjacent blades 62.
Furthermore, device 20 enables the operator to easily remove finely sliced particles from between adjacent blades 62.
In other words, each platform 40 is arranged between a pair of adjacent blades 50.
A set of dispensing sections 31 may be formed between the adjacent blades 26.
Figure 7 is a cross-section taken through line VII-VII shown in Figure 4, showing two adjacent blades.
You'll also be interested in:
Examples of using Adjacent
Show more
Drift will injure adjacent crops or plants
Adjacent to ecologically and culturally significant rivers
Low level vents in adjacent compartments are permitted
Examples of using Blades
Show more
Damaged or worn blades should be replaced immediately
Blades cut on the draw or back stroke
Mishandling of the blades may cause injury
