Examples of 'adjacent turns' in a sentence
Meaning of "adjacent turns"
adjacent turns - Refers to consecutive or neighboring directions or movements
How to use "adjacent turns" in a sentence
Basic
Advanced
adjacent turns
Adjacent turns of the coil may abut each other.
Preferably no hollow spaces should remain between adjacent turns.
The lateral edges of adjacent turns abut against one another.
And this conducting wire is for example wound forming adjacent turns.
A spirally continuous seam separating adjacent turns of the fabric strip is thereby formed.
Additional rotation prevention means can be formed by positive locking of adjacent turns.
A helically continuous seam separating adjacent turns of the fabric strip is thereby formed.
This series capacitance is formed from the mutual capacitances of adjacent turns.
Helically continuous seams separating adjacent turns of the additional fabric strips are thereby formed.
The wire can be covered with an insulant preventing contact between adjacent turns.
Between adjacent turns of the thread the flanks form a substantially V shaped trough.
The actuators can be deployed between adjacent turns of the helix.
The distance between adjacent turns remains approximately constant, despite the increasing track modulation amplitude.
This adhesive film also extends substantially in an axial direction and bridges adjacent turns.
Thus, interfitting of adjacent turns is obtained.
See also
In this case, a helical connection plate extends between adjacent turns.
In particular, contact between the adjacent turns of the coil must be avoided.
Care is taken when winding the running strand 71 to form carefully adjacent turns.
Yet, it is apparent that the bosses 5 of two adjacent turns could be angularly offset.
It should also be understood that a sheath might use a variable spacing L2 between adjacent turns.
The distance between two adjacent turns INT corresponds to the minimum isolating gap 2.
Preferably the piston rod may be a flexible helix with narrowly adjacent turns of windings.
In a preferred embodiment, adjacent turns 975 are disposed in close proximity to one another.
The first and second side regions that correspond to adjacent turns overlap by a distance.
Generally, the unidirectional clutch 5 assumes the form of a helical spring, preferably with adjacent turns.
More preferably, the pitch between adjacent turns is about 1mm to about 1.5mm.
This causes formation of the weld lines 6 between adjacent turns 3.
At least one cooling sector ( 4 ) defined between adjacent turns of said plurality of concentric turns ( 3 ) ;.
Soft gasket material may fill the space between the faces 104 of adjacent turns.
This permits obtaining a very precise spacing between two adjacent turns of the helicoidal winding.
The inner turns 12 and the outer turns 14 are secured by spot welding to adjacent turns.
In practice, the combustion fumes cross the gap between the adjacent turns in radial direction.
The next step comprises inserting spacers between adjacent turns 13.
The compressible air pocket 46 occupies the entire distance between adjacent turns of the reinforcing element.
The " leaking " coil may have a gap between adjacent turns of the coil.
According to a variant not shown, the helical gap between the adjacent turns 12 varies along helix 5.
Perhaps 1 mm to 1.5 mm would be a sufficient gap between adjacent turns of the winding.
Figure 4 illustrates a stretched turn having gaps 50 between adjacent turns of spring 18.
You'll also be interested in:
Examples of using Adjacent
Show more
Drift will injure adjacent crops or plants
Adjacent to ecologically and culturally significant rivers
Low level vents in adjacent compartments are permitted
Examples of using Turns
Show more
A cocoon which turns them into adults
Turns out to be just an ordinary cigar box
Turn two full turns on each screw
