Examples of 'adjust the flame' in a sentence
Meaning of "adjust the flame"
Means to modify or regulate the intensity or size of a flame in a controlled manner. It is commonly used in the context of gas-powered devices such as stoves, heaters, or lamps, where the flame can be adjusted to increase or decrease heat or light output
How to use "adjust the flame" in a sentence
Basic
Advanced
adjust the flame
Adjust the flame to the desired height.
Turn the knob to adjust the flame size.
Adjust the flame heights to suit.
You will adjust the flame.
Adjust the flame intensity to direct it onto the.
Use the guides and adjust the flame as needed.
Adjust the flame after it is regular.
Later models used a separate valve to adjust the flame.
Adjust the flame base color to red or blue.
Use the marks as a guide and adjust the flame as needed.
Adjust the flame height to suit by turning the knob.
Use the knob indicator settings to adjust the flame as needed.
Adjust the flame so that it does not wrap around the cookware.
You may be interested to know how to adjust the flame on a stove.
Adjust the flame.
See also
Turn the control knob to position 2 to adjust the flame.
Adjust the flame so that it does not exceed the perimeter of the pot.
When the burner lights, adjust the flame to the desired level.
Adjust the flame so it does not extend beyond the edge of the pot.
Once gas is ignited, turn the knob to adjust the flame size.
Adjust the flame to the desired height with the control knob.
Once the burner is lit, it is possible to adjust the flame based on need.
Then adjust the flame so it does not extend beyond the edge of the utensil.
After the burner ignites, turn the knob to adjust the flame size.
Use caution and adjust the flame to avoid boiling over when cooking.
After the flame lights, turn the knob to adjust the flame size.
To adjust the flame brightness press the FLAME button.
When the gas burner has been turned on, adjust the flame according to need.
Use screw B to adjust the flame size of the outer portion of the dual burner.
After the burner ignites, turn the knob in either direction to adjust the flame size.
Use screw B to adjust the flame size of the center portion of the bridge burner.
After ignition, immediately release the push-button and adjust the flame according to need.
Adjust the flame anywhere between the HI and LO positions.
After the flame is burning all the way around the burner, adjust the flame.
Do not adjust the flame between HI and OFF.
After you ignite the burner in maximum position ; you can adjust the flame length between.
Adjust the flame by turning the burner valve 2.
Turn your Main Gas Valve to adjust the flame height & heat output as you desire.
Adjust the flame height by moving gas control lever between left /.
In figures 6 and 7, the ability to adjust the flame nozzles 86 is illustrated.
To adjust the flame brightness and ember log light, press the flame.
Light the burners, and adjust the flame by carefully turning the handles on the burners 7.
Adjust the flame intensity to direct it onto the bottom of the pan only, making.
You can adjust the flame speed, brightness, color and even the size of the flames.
Adjust the flame to medium-low.
Adjust the flame height, To make the flames larger, press the up arrow.
Adjust the Flame ( if necessary ), WarnInG Allow Burner ( s ) to cool before attempting to remove them!
You'll also be interested in:
Examples of using Adjust
Show more
Adjust the antenna to minimize the interference
But we can not adjust it without a screwdriver
Adjust the volume setting to an audible level
Examples of using Flame
Show more
Flame retardant materials bear the mark
Envision the flame burning within you
Flame disk or combustion heads dirty or worn
