Examples of 'adjustment dial' in a sentence
Meaning of "adjustment dial"
Adjustment dial: a control on a device or machine that allows users to make small changes or corrections to settings
How to use "adjustment dial" in a sentence
Basic
Advanced
adjustment dial
Steam adjustment dial set to the minimum.
Adjust the ice thickness adjustment dial.
Steam adjustment dial set to the maximum.
Setting the tension force via the adjustment dial.
Ice thickness adjustment dial is not set.
Raise tip of guide bar while rotating tension adjustment dial.
Turn the adjustment dial clockwise until it stops.
Set the desired speed via the speed adjustment dial.
Set the feed adjustment dial to the minimum setting.
You can limit the setting range that can be used at the adjustment dial.
Turn cutting width adjustment dial in the desired direction.
J Differential feed ratio adjustment dial.
Check whether the adjustment dial is in the position shown.
If stretch stitch patterns are distorted, correct it with the fine adjustment dial q.
Check that the feed adjustment dial w does not rotate.
See also
To change the stitch width, turn the stitch width adjustment dial.
Find the adjustment dial.
The adjustment dial may now be set to the desired tracking force, in grams.
Viewfinder, rotate the diopter adjustment dial little by little.
The speed adjustment dial can be adjusted even if the drill is running.
Always check that the tool 's speed adjustment dial is set to its lowest speed.
Fine adjustment dial for high-precision alignment.
To adjust the speed, rotate the Speed Adjustment Dial to the desired setting C.
The adjustment dial 31 provides a means for setting a current for executing an instant trip operation.
The letters 1 through 6 can be found on the speed adjustment dial 2.
Rotate the adjustment dial only when the motor is running.
Turn the stitch length adjustment dial ( B ) to.
Rotate the diopter adjustment dial until the autofocus frame mark appears sharp in the viewfinder.
The rotation speed of the motor 80 may be made constant without the adjustment dial 91.
The movement sensitivity adjustment dial has been preset to a level which will suit most situations.
As shown in Fig . 3, a window 9 is formed on the side face of the adjustment dial 5.
Turn the diopter adjustment dial until the AF target mark is clearly visible.
The proximal recessed surface 252 of the needle stop adjustment dial 248 acts as the needle stop.
Turn the diopter adjustment dial until you see the AF target mark clearly.
The top of the CAS-360 includes a power button, an LCD control screen and adjustment dial.
Turn the Diopter adjustment dial to see the Autofocus mark clearly.
The adjustment dial 91 can adjust the rotation speed of the motor 80 in multiple steps.
Also, the adjustment made by the adjustment dial 91 is not limited to the six steps.
Angle adjustment dial Adjust the angle to send infrared rays to the 3D Glasses.
Turn the headlamp beam adjustment dial from to » page 44.
The adjustment dial 3050 includes internal threads ( female threads ) and is trapped between the frame geometry.
In the periphery of the twist torque adjustment dial 10, graduations from 1 to 8 are indicated.
Sensitivity adjustment dial for in-game adjustment of Your wheel sensivity.
The OPEP device also includes an adjustment dial 254, as described below.
On / Off and Adjustment Dial Switch, to turn on / off the power and to adjust the intensity.
In the embodiment, for example, the adjustment dial 91 is described thereon with numbers of 1 to 6.
Turn brush height adjustment dial to desired setting as follows Figure 5.
To adjust it, use the handle resistance adjustment dial ( 7 ) located underneath your joystick 's base.
As the needle stop adjustment dial 248 changes its position, the needle stop location also changes.
By turning the needle stop adjustment dial 248, the allowed needle extension length varies.
You'll also be interested in:
Examples of using Dial
Show more
It will dial the last number called
I must have hit speed dial by mistake
Dial with purple and yellow zones
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
