Examples of 'adjustment knobs' in a sentence
Meaning of "adjustment knobs"
refers to adjustable controls or switches that are used to modify or fine-tune certain settings or parameters. They are commonly found on electronic devices, machinery, or equipment to allow users to make precise adjustments
How to use "adjustment knobs" in a sentence
Basic
Advanced
adjustment knobs
Always tighten adjustment knobs before use.
Adjust the bracket by using the adjustment knobs.
The adjustment knobs for cutting inclination are tightened.
Be sure to provide enough clearance to pivot heater and reach adjustment knobs.
Both drag adjustment knobs are provided with graduated scales.
This weight limit is limited by the tightness of the height adjustment knobs.
Only operate the adjustment knobs when the vehicle is stationary.
This is a simple process using the azimuth and altitude adjustment knobs.
Use the adjustment knobs to secure the adjustable front portion.
Always make sure before beginning exercising that the adjustment knobs are tightened.
Two adjustment knobs are associated with the pair of coaxial shafts.
The knob locking bar is located above each of the pairs of adjustment knobs.
The fence adjustment knobs allow adjustment of the left or right fence.
Move the microscope stage with the coarse adjustment knobs to the highest position.
Two adjustment knobs are used to secure the base to the receiver.
See also
The are festooned with wires and adjustment knobs flopping on the end of flexible shafts.
Apply Lithium grease on the metal threads of all the adjustment knobs.
Find the coarse and fine adjustment knobs on the side of the microscope.
If there is binding, continue to loosen adjustment knobs.
The drag adjustment knobs are mounted on the left-hand side of the head.
You may now set the INTERVAL and DURATION adjustment knobs to the desired position.
Remove adjustment knobs ( A ) and carriage bolts ( B ) to extend or retract backboard and rim.
Firmly hand-tighten the handle adjustment knobs.
To remove them, unscrew the fence adjustment knobs several turns and slide each fence outward.
On the side of the NT-USB there are two adjustment knobs.
Check adjustment knobs monthly page 15.
Never counter-rotate the right and left adjustment knobs at the same time.
Re-tighten the tilt adjustment knobs ( 4 ) on each side of the fan.
Adjust the blade to the 0 position with the inclination adjustment knobs See picture 6a.
During shipping, the wheel adjustment knobs are fully tightened.
When aiming the fixtures, use the bracket / yoke adjustment knobs.
For the lowest cutting level, move the adjustment knobs to position B as shown in Fig . 11.
Remove the metal shroud above the brush base to access the two adjustment knobs Figure 39.
Before making a cut, make sure the depth and bevel adjustment knobs are tightly screwed on.
BEFORE STARTING, be certain the motor, table, attachments and adjustment knobs are secured.
Take the cutting disk to the 45 position with the inclination adjustment knobs See picture 7.
NOTE, Do not over-rotate the adjustment knobs.
On detent plate, ( 2 places ) always tighten adjustment knobs before use.
You'll also be interested in:
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
Examples of using Knobs
Show more
Turn knobs counterclockwise to light main burners
To avoid damage to knobs or flange area around
Knobs are always getting racked in the showers
