Examples of 'adjustment ring' in a sentence
Meaning of "adjustment ring"
This phrase is commonly used in mechanical or technical contexts to refer to a component or device that allows for adjustments to be made. It typically refers to a circular or ring-shaped object that can be turned or rotated to change settings or make necessary modifications
How to use "adjustment ring" in a sentence
Basic
Advanced
adjustment ring
Rotate adjustment ring to the desired setting.
Reset by means of the adjustment ring.
Number on adjustment ring with arrow on housing.
Pull up on the detent lever to release the fi ne adjustment ring.
Push the fi ne adjustment ring forward until it.
The torque is adjusted by rotating the torque adjustment ring.
Markings on the adjustment ring at the top.
On the top of the helmet is the lens adjustment ring.
Blade adjustment ring contrast list.
Unscrew the plug and the adjustment ring nuts.
Tension adjustment ring is too loose.
The upper mainframe is connected to and supports an adjustment ring.
Remove the depth adjustment ring from the motor.
Adjust the depth of cut by turning the depth adjustment ring.
Turn the adjustment ring to the desired length setting.
See also
The selected setting is the setting in the centre of the adjustment ring.
Set the torque adjustment ring to the drilling position.
Tighten or loosen the belt by moving the webbing through the adjustment ring.
The internal adjustment ring nut must be only partially screwed.
Unscrew the plug and the internal adjustment ring nut completely.
The diopter adjustment ring is located directly below the right eyecup.
The contact surface of the bud may be changeable by adjustment of the adjustment ring.
Diopter adjustment ring on the right eyepiece until the view is focused.
Do not turn the length setting adjustment ring beyond the highest setting.
Adjustment ring can snap into both horns on the air cap.
The torque is less when the torque adjustment ring is set on a lower setting.
A threaded adjustment ring is screwed onto the threaded upper end of the vertical pipe.
The series of pins prevent rotation of the adjustment ring relative to the mainframe.
The adjustment ring is prevented from moving in the axial direction in said annular groove.
Slide the motor down until the depth adjustment ring snaps into place.
Turn the depth adjustment ring along with the adjustable scale to the desired depth.
Mount the nozzle on the spray pipe markings on the adjustment ring at the top.
Turn the dioptric adjustment ring on the left eyepiece to the zero position.
The setting appears in the window below the Precision Zoom Lock adjustment ring.
Set the diopter adjustment ring to zero Fig.
Chisel to the required position with the chisel adjustment ring 3.
Drilling Drilling symbol on adjustment ring aligns with the arrow maximum torque.
Select 0 on the vertical drag adjustment ring.
Focus adjustment ring VARIFOCAL adjustment ring.
The setting will appear in the window below the adjustment ring Precision Zoom Lock.
Rotate adjustment ring to desired setting, aligning.
To loosen the tension, turn the chain adjustment ring anticlockwise.
Thereby, the adjustment ring should face forwards.
G, means that the lens does not have an aperture adjustment ring.
Slide the motor down until the depth adjustment ring snaps into the quick release latches A.
Assemble base to motor, ensuring base is attached to the depth adjustment ring.
Stylus pressure adjustment ring Center line.
Insert motor into base, ensuring base is attached to the adjustment ring c.
Tighten or loosen the adjustment ring to adjust the camera 's position.
The following description applies to a detector with parameter setting using an adjustment ring 6.
You'll also be interested in:
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
Examples of using Ring
Show more
And place a ring upon her hand
Ring tones will not hold up in court
I had to go into the ring to finish it myself
