Examples of 'adsorbate' in a sentence
Meaning of "adsorbate"
adsorbate (noun) - A substance that is adsorbed on the surface of another material. This term is commonly used in chemistry and material science discussions
Show more definitions
- a substance that has been adsorbed
How to use "adsorbate" in a sentence
Basic
Advanced
adsorbate
The adsorbate gas that is used is nitrogen.
The ability of an adsorbent to resist desorption of an adsorbate.
There are no interactions between adsorbate molecules on adjacent sites.
The adsorbate gas used is nitrogen.
C eq is the bulk concentration of the adsorbate in equilibrium.
This adsorbate then undergoes crystallization.
Ceq is the bulk concentration of the adsorbate in equilibrium.
The adsorbate is gradually bonded to the adsorbent in higher and higher areas.
The mass is dried to form an essentially tasteless adsorbate.
The boiling pressure of the adsorbate is calculated as a function of temperature.
Using nitrogen gas as adsorbate.
K and n are constants for a given adsorbate and adsorbent at a particular temperature.
The abscissa displays the absolute pressure of the adsorbate in kPa.
The adsorbate is then dried and used to prepare a chewable multilayered tablet.
First known method consists of a controlled deposition of adsorbate on a solid surface.
See also
The concentration of the adsorbate at the adsorber outlet then corresponds to the inlet concentration.
The order of addition of the components of the adsorbate is not critical.
The quantity of adsorbate used may vary widely depending upon the particular medicament drug dosage.
The adsorbents were characterized and tested using chromium as the metal adsorbate.
The controller actuated two electronic valves to adjust the adsorbate pressure within the feed manifold.
The surface is subsequently saturated by means of immersion into a dilute solution of another adsorbate.
The fluid leaving the adsorber therefore contains no adsorbate at this time illustration.
Chemisorption is a kind of adsorption which involves a chemical reaction between the surface and the adsorbate.
The adsorbent can not bond any more adsorbate over the entire height of the fixed bed.
This process is generally reverted by applying heat to the adsorbent and adsorbate phase.
The adsorbate was added to the sealed vial with a Hamilton syringe.
The binding energy varies with the combination of the adsorbate and surface.
Changes in spectra of adsorbate / adsorbent and interpretations were presented.
The hot gas is passed through the bed being regenerated so removing the adsorbate.
Nitrogen is the most commonly employed gaseous adsorbate used for surface probing by BET methods.
The second immersion step involves immersion of the sample into a second adsorbate solution.
The adsorbate may be prepared as follows,.
This allows you to adjust the desired feed concentration of the adsorbate very precisely.
The solid adsorbate may optionally comprise a concentration-enhancing polymer.
The adsorbent then sorbs the medicament drug from solution to form the medicament adsorbate.
Preferably, a solution of the adsorbate is added to the dried support material.
Surface área measurements were by the known BET method using nitrogen as adsorbate.
Incorporation of the adsorbate into, for example, a candy base is not difficult.
Method of Operating for the Preparation of an Adsorbate.
The solid adsorbate may also be mixed with a concentration-enhancing polymer.
Breakthrough - the first appearance in the effluent of an adsorbate of interest under specified conditions.
In both cases, the adsorbate is substantially reducible but not appreciably oxidizable.
The procedure was repeated at the next temperature and / or for the next adsorbate gas.
After a certain period of operation, the adsorbate concentration in the outlet of an adsorber rises.
Schematic representation of the cross-flow filration system used to separate the amino acid adsorbate Figure 2.
In the first part, the hindered rotation of molecular adsorbate and photoelectron backscattering are presented.
The multiple adsorbate case is covered in the Competitive adsorption sub-section.
In a preferred embodiment, the surface is a gold surface and the adsorbate solution contains a thiol.
A nifedipine adsorbate was prepared as in the case of Example 4.
These chemical mechanisms may change the strength of intramolecular adsorbate bonds or surface-adsorbate bonds.
