Examples of 'adsorbed water' in a sentence
Meaning of "adsorbed water"
Adsorbed water: Water molecules that are attracted to and adhere to the surfaces of solid materials through the process of adsorption. This phenomenon is commonly observed in materials such as clay minerals and activated carbon
How to use "adsorbed water" in a sentence
Basic
Advanced
adsorbed water
Adsorbed water molecules can move.
The zeolite is preferably substantially free of adsorbed water.
Adsorbed water evolves during this heating period.
Small pores do not readily cause desorption of adsorbed water.
Adsorbed water evolved during this heating period.
Hindered adsorbed water.
Free water may contain absorbed water and adsorbed water.
Immobile adsorbed water.
Adsorbed water is released from a surface under vacuum conditions or under increased heat.
Fine grained soils have a layer of adsorbed water strongly attached to their surface.
At low relative humidities, moisture consists mainly of adsorbed water.
They also expel adsorbed water from the soil and increase compaction.
A new silicon wafer has a polar surface and has some adsorbed water on the surface.
The effect of adsorbed water and structural water on the molecular hydrogen production was studied.
They may be flame-dried to remove adsorbed water.
See also
Hydrophilic coatings are plasticized by adsorbed water which increases their elasticity and peel tendency.
The extrudates were used as is, and were not previously dried to remove adsorbed water.
This also includes the removal of adsorbed water on surfaces of the milling device.
Absorption pressure, attraction of surrounding soil particles to one another by adsorbed water films.
During a regeneration cycle, adsorbed water is removed from the desiccant material.
Under normal atmospherio conditions the iron-oxide is ooated with a film of adsorbed water.
In addition, a reduction in physically adsorbed water layer upon interruption of the photoexcitation is delayed.
Preferably, the silica gel is used in a state wherein the gel contains no adsorbed water.
In this first step, adsorbed water and exchanged ammonium ions are intensively removed.
A series of powders were prepared with varying adsorbed water content as per Example 5.
Moreover, the adsorbed water degeneration accelerates the water flow around the heat source.
Accordingly, in order to confirm such a peak, adsorbed water must be removed.
More preferably the adsorbed water content should be from 8 to 15 weight percent.
The silica support should be dry, that is, free of adsorbed water.
Preferably the adsorbed water content should be from about 8 to about 15 weight percent.
The inorganic support can be subjected to a thermal treatment, e.g. to remove adsorbed water.
One is for adsorbed water ( swelling water ) and the other is for free water.
First the temperature of bed 41 is increased, to initiate the release of adsorbed water.
The thickness of the adsorbed water layer has been reported to increase with increasing humidity [ 5 ].
The sorpreaction is continued until reactor 601 is essentially saturated with adsorbed water.
The samples were then activated at 350°C overnight to remove adsorbed water from the pores.
Key words, nuclear waste isolation, clay, low porosity, thermal strain, adsorbed water.
Key words, consolidation, swelling clay, permeability, exchangeable cations, diffuse double layer, adsorbed water.
The inorganic oxides should be " dry ", provided the term " dry " means free of adsorbed water.
As regards zeolites, a hypothesis is that zeolite 4A normally contains adsorbed water approx . 20 %.
The samples were heated to 300°C for 3 hours in vacuo to remove adsorbed water.
You'll also be interested in:
Examples of using Water
Show more
There is no water damage or fire extinguisher residue
Do not clean the engine with water
Water freezing in the system will break it
Examples of using Adsorbed
Show more
Mass of substance adsorbed on soil at adsorption equilibrium
Adsorbed passivated resin since already regenerated
All tested WSPs adsorbed on cellulose surfaces
