Examples of 'air at a temperature' in a sentence
Meaning of "air at a temperature"
air at a temperature ~ Denotes the specific degree of hotness or coldness of the surrounding atmosphere
How to use "air at a temperature" in a sentence
Basic
Advanced
air at a temperature
Put the air at a temperature that refreshes the environment without going over.
Specifically, the compressor tends to deliver compressed air at a temperature that is higher than ideal.
PREHEATED AIR -- Air at a temperature exceeding that of the ambient air.
O is at a temperature of greater than 0ºC, in air at a temperature below freezing 2.
Hot air at a temperature of approximately 120°F is used to dry the coated cores.
The film was dried in a stream of sterile air at a temperature close to 22 ° C.
Then hang it in air at a temperature not exceeding 60 °C.
The chiller has a capacity of 2 kW and produces chilled air at a temperature of 5°C.
Drying is performed in air at a temperature of about 90 ° C. for one hour.
The extrudates were directly subjected to calcination in flowing air at a temperature of about 600°C.
The web was bonded using hot air at a temperature of 135°C for approximately 4 seconds.
The acetaminophen was then placed in a fluidized state by a flow of air at a temperature of 30°C.
The fibers are quenched by cold air at a temperature around 15 °C and drawn down.
Preferably, the crosslinked fabricated article is stabilized in flowing air at a temperature at or above 160 °C.
The supports were dried in hot air at a temperature not exceeding 100°C.
See also
In a CCGT plant a conventional rotary compressor provides hot compressed inlet air at a temperature of about 350°C.
Gases which ignite spontaneously in air at a temperature of 54.4 ºC or below.
Before mounting the tested specimens for assessment, dry them in air at a temperature not exceeding 60°C.
And then drying the capsule with air at a temperature in the range from 30 to 60 ° C.
All electrical test is to be conducted with the ambient air at a temperature of 25 ± 5 ℃.
The resulting drops are solidified with air at a temperature of -30°C in a cooling zone.
The support tube was cleaned and oxidized in air at a temperature of 600 °C.
The impregnated support is dried in hot air at a temperature not exceeding 100°C.
The loaded support was subsequently calcined in the air at a temperature of 450°C.
The product is subsequently calcined under air at a temperature of 900 ° C. for 4 h in the stationary phase.
Thereafter, the polyurethane foam was burned off in air at a temperature of 700°C.
The plates were incubated in air at a temperature of 37°C.
After coating, the discharge vessels were dried in air at a temperature of approximately 70°C.
Method according to claim 3, characterized in that air at a temperature of over 650°C is supplied.
The drying procedure was carried out by blowing hot air at a temperature of 120°C for 10 minutes.
The polymer granules can be thermally treated with hot air at a temperature ranging from 30 to 60°C.
The polymer is preferably cured in air at a temperature below 400 ° C.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Air
Show more
Air sealed in hydraulic system while operating
Application of the air limited quantities mark
The air will be full of jets in a minute
