Examples of 'airflow rate' in a sentence
Meaning of "airflow rate"
Airflow rate refers to the rate at which air flows through a space or object, typically measured in units such as cubic feet per minute (CFM) or liters per second (L/s). It is used in various fields such as HVAC systems, air pollution control, and ventilation design to assess the efficiency or effectiveness of air movement
How to use "airflow rate" in a sentence
Basic
Advanced
airflow rate
Airflow rate settings in each operation mode.
Humidifying capacity increases alongside airflow rate.
The airflow rate can not be changed.
Purifying capacity increases alongside airflow rate.
Airflow rate measurement and adjustment functions.
This is because the airflow rate is automatically controlled.
Airflow rate switching initial setting.
It selects the airflow rate setting.
The airflow rate is fixed to the maximum setting.
Fan operates at certified airflow rate to reduce humidity.
Low airflow rate is used prevent humidity increase.
Joystick for setting temperature and airflow rate.
Temperature and airflow rate can not be changed.
Air is delivered to all parts of room at a high airflow rate.
Each pressing of advances the airflow rate setting in sequence.
See also
Detachable airflow rate measurement and adjustment module available.
It takes some time until the airflow rate changes.
Airflow rate can be adjusted by changing the size of the trimming plate.
Set the temperature and airflow rate you require.
Optimum ventilation of the cabin due to very high airflow rate.
Adjustable airflow rate.
Their soiling may cause considerable drops in airflow rate.
Qv is the airflow rate.
The mass airflow rate can be calculated as a function of this average pressure.
Now use the joystick to set the airflow rate.
Adjustment for the desired airflow rate can be performed after installation.
The third column represents the experimental value of the airflow rate.
Impressive airflow rate.
Adjust the airflow rate by cutting the trimming plate according the needs.
Ability to measure airflow rate.
This is the high airflow rate mode that quickly removes airborne dust.
Adjustment of supply airflow rate.
The reference airflow rate from the calibrated vent is used for monitoring system operation.
Triplicate runs were performed for each airflow rate condition.
Decrease the airflow rate slightly in FAN mode only.
The time required depends on the airflow rate per bushel.
Fan only The airflow rate is fixed to the maximum setting.
The remote controller displays the airflow rate that is set.
Airflow Rate Reducing airflow through the tower causes the cold water temperature to rise.
Fan will operate at certified airflow rate and enter time delay.
This is true even when the dirt has reduced the airflow rate.
The fan units enable large airflow rate and small static pressure lift.
Airflow rate when heating thermostat is OFF.
Energy use is essentially proportional to the product of airflow rate and pressure drop.
The airflow rate will be set to AUTO.
The additional parts comprise means for measuring the airflow rate drawn by the engine.
Airflow rate when cooling thermostat is OFF.
Measure the differential pressure with a manometer and calculate the airflow rate using the formula below.
Airflow rate when heater thermostat is OFF.
This operation decreases the airflow rate slightly in FAN operation only.
You'll also be interested in:
Examples of using Airflow
Show more
Airflow measurement and revision of test standards
The desired airflow mode can be selected
Airflow rate settings in each operation mode
Examples of using Rate
Show more
The mortality rate is certainly on the rise
Rate stations and assign audit points
Low literacy rate and school attendance
