Examples of 'alarm contact' in a sentence
Meaning of "alarm contact"
An alarm contact is a component of a security or monitoring system that is triggered when a specific event occurs. It can be a device or sensor that sends a signal to an alarm system, notifying the system of a potential threat or danger
How to use "alarm contact" in a sentence
Basic
Advanced
alarm contact
Each individual alarm contact can be defined.
Temperature measuring device including an alarm contact.
The alarm contact switches when a fault occurs.
Means of the external alarm contact rather than the.
Alarm contact for low battery.
Signals and alarm contact.
Alarm contact for remote monitoring.
Feedback of error messages by means of an alarm contact fault contact.
The alarm contact setting can not be reset by the keyboard.
Potential free alarm contact.
A global alarm contact is used to force all cameras into an alarm condition.
The matrix is provided with an alarm contact for each input.
This alarm contact is also activated if the control signal or mains power is lost.
Overflow alarm contact.
The system monitor produces an alarm and activates its alarm contact.
See also
This module operates the alarm contact and performs the OpenFlow processing.
Alarm contact not used Error in alarms setting.
The charger is equipped with a potential free alarm contact change over type.
StByactiv alarm contact of the superordinated system.
If the alarm input is to be admitted, select the alarm contact type.
StByactive alarm contact of the superordinated system.
Alarm input 1 is used for connecting an alarm contact for external detectors.
NO / NC alarm contact on all our products.
Instead of the switch, an alarm contact may be connected.
Alarms normally closed, the contacts are connected to the common alarm contact pin 9.
The Logic Drive then activates an alarm contact to indicate that an overload has occurred.
Alarm contact ( special version, needs to be mentioned on the purchase order ).
Pins that are not connected to any alarm contact should be configured as NOT USED.
Fault Alarm Contact Power failure, specific port link error.
If required, first wire the alarm contact and the alarm reset.
Alarm contact output 2c.
By default an alarm contact is Normally Closed.
With electronic ECO DRAIN condensate drain, including volts-free alarm contact.
Potential-free alarm contact in case of system failure.
Enter the preset number from 00 to 99 for the selected alarm contact.
In this situation, the above-mentioned alarm contact is hardly incorporated in such a small circuit breaker.
NC alarm contact NC alarm contact e.g. contact switch.
In Variant B, the tamper contact and alarm contact are monitored in one zone.
NC alarm contact NC alarm contact e.g. con act switch.
Connect the corresponding alarm contact to the alarm input, i . e.
Alarm contact 2 will trigger the main alarm / shut-down.
The T-shape pins and their corresponding alarm contact sheets are respectively connected a alarm electrical circuit.
Alarm contact, No.
Not used, the alarm contact is ignored.
You'll also be interested in:
Examples of using Contact
Show more
I have little contact with the neighbours
Contact officer for national report if different
We can not contact the victim either
Examples of using Alarm
Show more
From the alarm of hearing your name
I am checking for laser beam alarm triggers
Fire alarm systems with flashing lights
