Examples of 'alarm input' in a sentence
Meaning of "alarm input"
Alarm input refers to a signal or trigger that activates an alarm system or security measure. This phrase is commonly used in the context of security systems, surveillance technology, or emergency response procedures
How to use "alarm input" in a sentence
Basic
Advanced
alarm input
Connect up to four alarm input cables to relay.
An alarm input is assigned to each camera input.
Push video trigger via alarm input.
Alarm input and output are set on a submenu.
The sensor input is used as the alarm input.
The global alarm input is used to protect images.
Sends a signal to another device when an alarm input is detected.
Alarm input signal is not correct.
This item lets you preset a camera position to an alarm input.
Activate the alarm input by ticking the checkbox for.
Go to the alarm settings and activate the external alarm input.
Alarm input by phone.
Return to the desired benchmark conditions interrupts the alarm input.
The fire alarm input can be configured as normally closed or normally open.
Here you can view there is external alarm input or not.
See also
The global alarm input is used to set or unset the schedule function.
Set the alarm status according to the alarm input device.
The alarm input port and output has the protection circuit to guarantee device safety.
Alarm output can be triggered by both alarm input and video loss.
An NO alarm input is provided for each of the four camera channels.
Select OFF if no alarm is to be triggered via this alarm input.
B Indicates the alarm input that still is activated.
Alarm input Input for potential free external alarm sensors.
Each input can be set to act as an Alarm or High Level Alarm input.
Select the alarm input by activating or deactivating the check box and click Search.
Parameterizable external alarm input 1 has been activated.
Alarm input Alarm reset input.
Have the alarm sensors and alarm input connectors been connected properly?
Alarm input is ignored while the ALARM SUSPEND indicator is lit.
The nurse immediately enters an alarm input to his / her personal user equipment.
Alarm input connector, alarm reset connector.
For the same equipment, the digital input is foreseen for an external alarm input.
The zone alarm input and not on the Zone NOT input.
Note, This linkage is only available to access control point and alarm input.
High voltage alarm Input level LED flashing quickly.
MANUAL, Alarm recording is performed while the alarm input continues.
The push video alarm input corresponds with video input 1.
Set Alarm Window, Display the video triggered by event or alarm input on Video Wall.
If the alarm input is to be admitted, select the alarm contact type.
Alarm Triggers Supports motion, alarm input and noise detection.
Alarm input 1 is used for connecting an alarm contact for external detectors.
Connect the ground side of the Alarm input and / or alarm output to the GND connector.
DI - alarm input Activation of the alarm input by connecting the DI and GND connections.
Contact closure activated alarm input x4.
After setting the alarm input state and activation, move joystick rightwards when the.
The relay will respond if an alarm signal is applied to the alarm input pin 14.
Low voltage alarm Input level LED flashing slowly, buzzer beeps.
The Eyseo Pan / Tilt dome camera is equipped with 1 alarm input.
Enable PTZ, Alarm input to link the PTZ motion.
An Alarm ( Warning ) condition is generated if the ‘ ir-PCB ' Alarm input detects no voltage.
You'll also be interested in:
Examples of using Input
Show more
Do not use damaged input or welding cables
The input and output pairs are parallel
Select the desired input source correctly
Examples of using Alarm
Show more
From the alarm of hearing your name
I am checking for laser beam alarm triggers
Fire alarm systems with flashing lights
