Examples of 'alarm rate' in a sentence
Meaning of "alarm rate"
alarm rate: the frequency at which alarms are triggered or activated, often used in the context of security systems or medical devices
How to use "alarm rate" in a sentence
Basic
Advanced
alarm rate
Probability of detection and false alarm rate.
False alarm rate will remain.
Reduced false alarm rate.
The false alarm rate is therefore very low.
Constant false alarm rate.
A false alarm rate implies an increase in operating costs.
Low false alarm rate.
This usually results in an increase in the false alarm rate.
Extremely low nuisance alarm rate at high sensitivities.
For each signal we determine the false alarm rate.
A high false alarm rate is experienced.
The study did not look at the false alarm rate.
The false alarm rate must be minimized without causing missed detections.
Minimun false alarm rate.
It is anticipated that this detector will offer increased performance with a reduced false alarm rate.
See also
This allows to lower the false alarm rate as later explained.
The methods described previously present a high false alarm rate.
How you reduce alarm rate in your security system?
It applies to a device generating a very low or zero false alarm rate.
As would be expected, the false alarm rate decreases with increased time per scan.
Of high odds but at the cost of a higher false alarm rate.
For example, the false alarm rate may have a maximum half way in both graphs.
High probability of detection with a very low false alarm rate.
Panic alarm button record all cameras at the alarm rate and activate the alarm relay, R1.
The benefits include enhanced detection and a reduced false alarm rate.
Practically zero false alarm rate ( 1 for every thousands of hours ).
Should be used in conjunction with other sensors to reduce false alarm rate.
This is known as constant false alarm rate ( CFAR ) detection.
The two weighting factors are selected to provide an acceptable false alarm rate.
A standard cell-averaging constant false alarm rate ( CFAR ) algorithm is typically used.
Such a device should have a high confidence and a low false alarm rate.
More accurately, the false alarm rate is XXX %, as shown in Table 5.
The result has a higher detection rate and a lower false alarm rate.
The threshold is set such that the false alarm rate is about 0.1 %.
Moreover this variant exhibits the drawback of having a fairly high false alarm rate.
The threshold value is fixed as a function of the false alarm rate which is tolerable.
These provisions increase the reliability of the diagnosis and so reduce the false alarm rate.
If the threshold value is made smaller, than the false alarm rate becomes too great.
There is a large amount of random malconstructed packets that can generate a significant false alarm rate.
This allows the record rate to be switched to the alarm rate when VMD is.
High Security perimeter fence equipped with an intrusion detection system with 0 % false alarm rate.
The innovation also achieves a low false alarm rate of under 2 %.
But, we also risk an increased false alarm rate.
The 8 parity check bits can be used to reduce the false alarm rate.
The proposed standardization leads, in some cases, to powerful constant false alarm rate tests.
The predetermined value K1 is selected based on maintaining a predetermined false alarm rate for a PSC signal.
Figure 1 ⇓ shows the sensitivity versus the false alarm rate.
Good detection distance and effect, high stability, low false alarm rate.
With the fixed threshold test, we expect constant false alarm rate ( CFAR ).
Channel 36 includes only a threshold circuit of the constant false alarm rate ( CFAR ) type.
You'll also be interested in:
Examples of using Alarm
Show more
From the alarm of hearing your name
I am checking for laser beam alarm triggers
Fire alarm systems with flashing lights
Examples of using Rate
Show more
The mortality rate is certainly on the rise
Rate stations and assign audit points
Low literacy rate and school attendance
