Examples of 'align holes' in a sentence
Meaning of "align holes"
This phrase refers to the act of positioning or adjusting objects, typically with holes or slots, so that they are in proper alignment or fit together correctly. It is commonly used in DIY projects, construction, or mechanical tasks
How to use "align holes" in a sentence
Basic
Advanced
align holes
Align holes on handle with holes on base.
Hold blade arm up to blade and align holes.
Align holes in cover and mounting plate.
Pivot handles up and align holes in handle with holes.
Align holes in handle to holes in mounting pipe.
The process of the invention makes it possible to align holes formed at different levels.
Align holes in axle to axle brace and frame.
You may need to LIGHTLY tap end of pole to align holes.
Align holes in outer bag flange and base.
Push Flathead bolts back for the bracket to fit and align holes with bolts.
Align holes with protruding plastic.
Use INCLUDED Alignment Rod to help align holes during assembly.
Align holes in sanding disc with holes in back.
Make sure carriage is disengaged, so it will move as needed to align holes.
Align holes in grip and pusher.
See also
Raise deck and plate assembly to align holes and insert flanged pins 7.
Align holes in dome with threaded studs in emitter cover.
Raise deck and plate assembly to align holes and insert fl anged pins 6.
Align holes in cordwrap with corresponding holes in rear handle.
Place column assembly on base, and align holes in column support with holes in base.
Align holes in switch housing with holes in fitter plate.
Firmly press the new desired elastomer into place, and align holes in elastomer with.
Align holes in cordwrap with corresponding holes in front handle.
N Place PSU on the bottom of the case n Align holes & secure with screws n NOTE.
Align holes in side plate with side bracket as shown.
It is preferable that the align projections 47 are press fit to the align holes 42, respectively.
Align holes in the insert storage to holes in the base.
To attach, align holes and push together until it locks into place.
Align holes at top of handle braces with holes in handle uprights.
Align holes in metal cover with holes in small fitter plate.
Align holes of wheel with corresponding axle holes on the base of the walker.
Align holes in blade bracket and motor and secure with proper screws.
Align holes in control lever D with appropriate.
Align holes in the upper housing with the 2.
Align holes in light kit fitter with holes in switch housing . Note.
Align holes in spacer with holes in cross tube and insert M6 screws into aligned holes.
Align holes to the Base, and insert 2 Small Bolts N through the holes and finger tighten.
Align holes in rail with upper holes in bracket . 3c.
Align holes in hook-and-loop type sanding disc.
Align holes in back end of the T-rail with holes in opener 7.
Align holes in sanding disc with holes in backing pad, - English.
Align holes on arm and tubular receiver to insert threaded barrel Fig . 48.
Align holes in base foot with mounting holes on bottom of cabinet see Figure 13.
Align holes in blade ( F ) with holes inside motor.
Align holes in switch housing ( F ) with holes in fitter plate.
Align holes at the top of the struts ( D ) with hole in the handle uprights G.
Align holes in motor assembly ( D ) with holes in mounting bracket B.
Align holes in scroll iron ( D ) with screw holes in top of motor housing E.
Align holes in middle pole ( 6 ) with hole pattern on bottom pole 7.
Align holes in the top handle ( R ) with the.
