Examples of 'aligned holes' in a sentence
Meaning of "aligned holes"
This phrase refers to the condition where the holes of two or more objects are positioned in a straight line or in perfect alignment
How to use "aligned holes" in a sentence
Basic
Advanced
aligned holes
The aligned holes have an inner diameter.
Insert a small screwdriver into aligned holes.
Then fill the aligned holes with the screws.
And inserting the pin into the aligned holes.
Laterally aligned holes are formed through the leading hinge members.
Insert a pin through the aligned holes in the gear.
The aligned holes do not pass through all the hinge knuckles.
It may comprise a series of aligned holes separated by uncut material.
A rodent passageway extends within the body between two aligned holes.
Tighten the screw into the aligned holes using a screwdriver.
Providing aligned holes in the tape and information cards allows the attachment of a blister.
Place screws into all aligned holes and hand tighten.
The said aligned holes may be drilled after forging from the outside of the link.
Reinsert two threaded barrels into aligned holes on each side.
Both legs have square aligned holes in them through which the square drive rod 35 extends.
See also
The cap is formed with a flange having a series of axially aligned holes therethrough.
The fixing unit crosses aligned holes formed for this purpose in each of the parts.
The Innokin Plexus Coil is composed of a whole KAL panel with aligned holes.
Insert the screws into the aligned holes and tighten them.
Preferably, each group of holes consists of vertically aligned holes.
The fastener is installed through aligned holes located in two or more workpieces.
To remove blade, insert screwdriver into aligned holes.
A pin bolt extends through aligned holes in the two leg parts and in the flanges.
Align holes in spacer with holes in cross tube and insert M6 screws into aligned holes.
Cap screws 72 are located in the aligned holes to secure the insert to the base.
The screws 21 are engaged in one set out of two of the aligned holes.
Insert screws ( EE ) into the aligned holes and then tighten them.
Place the pin ( included with the wrench ) into the aligned holes.
Slide the bolts ( B ) through the aligned holes as shown in figure 3.
It comprises a pegboard 12 having the usual pattern of aligned holes 14.
In aligned holes in the lower part of the side plates 20 a rod 22 is arranged.
Insert saddle bolts ( DD ) through aligned holes.
The spaced parallel plates 100 have aligned holes through which a dowel 92 passes.
Insert a bolt through the aligned holes Fig . 2.
Insert the screws into the aligned holes and tighten them . Fig . 10.
Insert the clevis pin through the aligned holes Fig . 1.
Bushings 54 surrounding bolts 52, are inserted into aligned holes through the hub shell and rotor shaft.
You'll also be interested in:
Examples of using Aligned
Show more
Sheets not correctly aligned to punch pattern
Aligned federal and provincial measures are needed
Individual performance is aligned with departmental goals
Examples of using Holes
Show more
Great holes have been cut in the earth
Always remove the lid or put holes in it
They cut holes behind every cabinet
