Examples of 'alloy layer' in a sentence
Meaning of "alloy layer"
An alloy layer refers to a thin coating or sheet of a material composed of a mixture of two or more metals. It is commonly used in the context of metalworking, where different alloys are combined to enhance the properties or characteristics of a base metal, such as strength, durability, or resistance to corrosion
How to use "alloy layer" in a sentence
Basic
Advanced
alloy layer
This alloy layer grows continuously thick.
Lateral oxidation of said localized aluminum alloy layer.
The whole nickel phosphorous alloy layer was coated with a layer of copper.
Removing the volume and the metal or metal alloy layer.
The FeSn alloy layer provides corrosion protection to the underlying steel substrate.
Such a disrupted metal or metal alloy layer is not desired.
Advantageously some of the abrasive particles can even penetrate the alloy layer.
Interfacial iron alloy layer thickness for both coating layers was similar to immersion practice.
Determination of alloy layer.
Metal or alloy layer CM forms a shell of a certain thickness.
A preferred method to apply the zinc alloy layer is by hot dip.
The alloy layer 2 is slightly increased in thickness.
An organic coating layer is applied on top of the zinc alloy layer.
The silicon is primarily added to control the alloy layer between the iron and aluminum.
The samples are weighed before and after removal of the alloy layer.
See also
The average thickness of the Sn alloy layer was measured by the following method.
The ceramic network also may be infused with a metal alloy to form a metal alloy layer.
Said alloy layer based on zinc and copper ; and.
Process of aluminizing steel to obtain and interfacial alloy layer and product therefrom.
The thickness of this alloy layer preferably is less than or equal to about 3 um.
An aluminum bath with silicon was stated to minimize the alloy layer and reduce brittleness.
The Al-Fe alloy layer is not smooth on the surface and is inferior in lubricity.
There is no conspicuous growth of the alloy layer 2.
The thickness of the alloy layer coating this wire is 5 microns.
The compound layer is hereinafter referred to as the Al-Fe alloy layer.
The thickness of the alloy layer coating this wire is 1 micron.
Advantageously, resist spots may be produced beforehand on the alloy layer.
According to another example the braze alloy layer has a thickness of at least 10 um.
The zinc cover is present in valleys in the zinc-iron alloy layer.
Furthermore, an Al-Fe alloy layer is low in reactivity with the usual phosphate treatment.
If the bath temperature is too high, the alloy layer grows.
The zinc-iron alloy layer material may be coated with a passivation layer.
A polymer film coated with a tin-metal alloy layer is thus obtained.
The term CrCu alloy layer thus will include phased Cr-Cu layer in its definition.
Alternatively, a TiPd alloy target may be used to deposit the TiPd alloy layer.
Underlying the oxygen-rich alloy layer is the core zirconium-containing titanium alloy.
For grinding the end to a fine point, a thicker alloy layer should be used.
An alloy layer zinc - steel is present between the zinc coating and the steel.
Depositing a black passivation layer onto the second zinc-nickel alloy layer.
Between these layers, a tin-nickel alloy layer is deposited for suppression of corrosion reactions.
Next, a black passivate layer is deposited onto the second zinc-nickel alloy layer.
Deposition of a gold or a gold-based alloy layer onto the nickel or nickel-phosphorus layer.
In the cross-sections the composition for the obtained braze alloy layer were analyzed.
Next, a zinc-iron alloy layer was deposited from a plating baths discussed in the respective examples.
When the heating temperature is too high, the alloy layer may excessively grow.
Also, in the present invention, the coating layer is discriminated from the interfacial alloy layer.
The alloy layer had a pencil hardness of 2H.
The method according to claim 1, wherein the step of coating the alloy layer comprises.
Also, the interfacial alloy layer contains Fe and therefore, produces red rust by corrosion.
Both the thick zinc layer and the steel-zinc alloy layer have disadvantages.
You'll also be interested in:
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
Examples of using Alloy
Show more
Use of aluminium alloy cylinders in acetylene service
Alloy steels for quench and temper
Rods and wire of an alloy of titanium with
