Examples of 'aluminum substrate' in a sentence
Meaning of "aluminum substrate"
aluminum substrate: A material made of aluminum, often used as a base or support for electronic components or printing processes
How to use "aluminum substrate" in a sentence
Basic
Advanced
aluminum substrate
The aluminum substrate must be clean.
Neither grease caused corrosion of the aluminum substrate.
The treated aluminum substrate was then exposed to salt spray exposure.
The metal substrate is an aluminum substrate.
The cleaned aluminum substrate was rinsed with tap water at ambient temperature.
The mixture was coated on an aluminum substrate.
The grained aluminum substrate can be etched chemically with an acid or an alkali.
The primer was applied to an aluminum substrate and cured.
The aluminum substrate is also positioned during the anodization bath to ensure proper anodization.
The two materials were spray deposited together on an aluminum substrate.
The aluminum substrate was then air dried and painted with an organic finish coat.
These protein biochips comprise an aluminum substrate in the form of a strip.
The method of any preceding claim wherein the support is an aluminum substrate.
After cooling to room temperature the aluminum substrate was torn off from the rigid foam.
The aluminum substrate receives a flow of X ray photons symbolized by vertical arrows.
See also
The oxide layer may partially or completely cover the aluminum substrate surface.
New Aluminum substrate Paste was developed.
A method for coating an aluminum substrate comprising,.
According to a test, this deformation was observed on a surface of a molded aluminum substrate.
In other embodiments, an aluminum substrate or an FeCrAIY alloy substrate are used.
According to one embodiment, the electrically-conducting substrate is an aluminum substrate.
The coated aluminum substrate is then fabricated to form the desired three-dimensional article.
Therefore, it is not best practice to paint directly on an untreated aluminum substrate.
The aluminum substrate used was electro-grained and anodized with hydrochloric acid and sulfuric acid, respectively.
However, many adhesives do not adhere well to the aluminum substrate.
The aluminum substrate of the test panel is indicated by reference numeral 72.
A method in accordance with claim 1, where the substrate is an aluminum substrate.
The aluminum substrate remained for 384 hours before corrosion was apparent.
The resistance of a non-stick coating to abrasion is evaluated on a sandblasted aluminum substrate.
The aluminum substrate of claim 12, wherein said film-forming resin comprises a phenolic resin.
As such, the leads are kept out of contact with the aluminum substrate.
In FIG . 1 an aluminum substrate 1 has been shown schematically having a few cesium iodide needles 2.
The method of claim 3 wherein the metal foil substrate comprises an aluminum substrate.
The aluminum substrate was then immersed in the treatment solution of 75°F for one minute.
The composition of Example 3 also was extruded onto an aluminum substrate.
The aluminum substrate was then immersed in the treatment solution at 75°F for I minute.
The process of Claim 12 comprising electrolytically coating said zinc coated aluminum substrate with nickel.
A film applied over an aluminum substrate was baked for two minutes at 380°CF.
The process of Claim 9 comprising electrolytically coating said zinc coated aluminum substrate with a metal.
The aluminum substrate had been previously treated with a 1201 ALODINE etch.
The element of claim 25 in which the substrate is an aluminum substrate.
The aluminum substrate remained for 360 hours before corrosion was apparent . EXAMPLE II.
The method as claimed in claim 1, wherein the electrically-conducting substrate is an aluminum substrate.
Example 2, Drug coated onto an aluminum substrate.
Figures 28 and 29 compare the coefficients of friction for sintered coatings on steel and aluminum substrate.
Ten ( 10 ) measurements with Carbice CNT TIM both on copper and aluminum substrate were also performed.
The resulting dispersion was placed on a 200 mesh nickel grid with aluminum substrate.
Figures 11 through 13 compare the scratch resistance on steel and aluminum substrate.
The powder coating compositions V and VR were sprayed electrostatically on an aluminum substrate ( AL-46 ).
You'll also be interested in:
Examples of using Substrate
Show more
Apply as a drench to the substrate surface at seeding
Substrate not supplied with the printer
Maybe the laminated substrate was the trigger
Examples of using Aluminum
Show more
Aluminum reflector is standard for all versions
Bench wise with aluminum soft jaws
Mix aluminum powder with iron oxide
