Examples of 'amine solution' in a sentence
Meaning of "amine solution"
amine solution: An amine solution refers to a chemical solution containing amine compounds. These solutions are commonly used in various industries, such as pharmaceuticals, agriculture, and manufacturing
How to use "amine solution" in a sentence
Basic
Advanced
amine solution
The amine solution is then sent to a regeneration device.
So you have got your carbon dioxide in your amine solution.
The amine solution is conventionally regenerated by varying the pressure.
The substrate is then wetted with the aqueous amine solution.
The charged amine solution is then regenerated thermally and used again.
The prepolymer is added hot to the aqueous amine solution in the dispersion step.
The amine solution was then added dropwise to the filtrate with stirring.
Amine is regenerated by stripping the amine solution with steam in the regeneration column.
That is where you mix the natural gas with a solution called an amine solution.
A separate amine solution is prepared by completely dissolving the amine in the solvent.
We can perform a full analysis of your lean amine solution according to your needs.
The aqueous amine solution was poured off and allowed to drain for a few seconds.
The organic polymer solution is added slowly with stirring to the aqueous amine solution.
Alternatively the amine solution or suspension may be added to the nitrosyl polyfluoro salt slurry.
These results provide a comparison of the use of ethylene glycol in the aqueous amine solution.
See also
The amine solution is cooled in an ice bath and triethylamine 1.
The key is to pre-activate the carbon dioxide by incorporating it into an amine solution.
Meanwhile, the aqueous amine solution is obtained by dissolving an amine compound in a polar solvent.
Preferably, the platinum compound may be added as an aqueous amine solution of hexahydroxoplatinic acid.
If a non-aqueous amine solution is used, an aqueous acyl halide solution may also be used.
The device according to claim 6, wherein the capture fluid includes an aqueous amine solution.
Likewise, the recovered aqueous amine solution may be reused and a cyclic process obtained.
The amine solution is preferably immicible with the non-polar non-aqueous solvent described below.
The nano-structured support and the amine solution are then combined under stirring.
The polysulfone membrane 14 was then soaked with an amine solution.
After the one minute contact time, the amine solution was drained off vertically for 30 seconds.
The basic aqueous phase is, for example, an ammoniacal, ammonium carbonate or amine solution.
The commercially used amine solution is monoethanolamine ( MEA ).
A process of Claim 14, wherein the aqueous solvent comprises an aqueous amine solution.
The vaporized amine solution 26 can be reintroduced into stripping column 12 as shown in the Figure.
Once coated on the microporous support, excess aqueous amine solution may be optionally removed.
The amine solution was then run into the acid solution at 50°C over a period of 2 hours.
Then, the surface is secondly coated with an aqueous amine solution and a halide compound.
A portion of the resulting amine solution ( 32 ml ) was used in the next reaction.
The contact time of the CPG with the amine solution should be 3 min.
The pH immediately after the amine solution addition was 9.0.
The pH taken 2 minutes after the amine solution addition was 6.7.
You'll also be interested in:
Examples of using Solution
Show more
One proposed solution is sustained livelihood programmes
Find a ripe moment to propose solution or option
There is now a solution to most of these problems
Examples of using Amine
Show more
Amine wants to get involved pick sedans
It is typically removed by amine gas treating technologies
The amine itself is an effective corrosion inhibitor
