Examples of 'amount of polymer' in a sentence
Meaning of "amount of polymer"
amount of polymer: the quantity of a substance consisting of large molecules made up of repeating structural units
How to use "amount of polymer" in a sentence
Basic
Advanced
amount of polymer
Measuring the amount of polymer formed.
The amount of polymer is critical in order to avoid leakage.
The use of a minimum amount of polymer was also desired.
The amount of polymer sediment was determined for each sample.
Means for measuring the amount of polymer formed.
An exact amount of polymer was used to fill the mould.
The degree of absorbency is determined by the amount of polymer used.
A predetermined amount of polymer was used to fill the mould.
A low concentration solution is created by adding a small amount of polymer to a solvent.
The amount of polymer to be used depends upon the polymer.
There is therefore today a large amount of polymer films used in agriculture.
The amount of polymer obtained was determined by the carrier weight increase.
Spraying is continued until a suitable amount of polymer is deposited on the stents.
The weighed amount of polymer is dissolved in a defined volume of chloroform.
It also makes it possible to obtain a larger amount of polymer per cycle.
See also
Increasing the amount of polymer increases the amount of scattering.
Generally the amount of fibres will exceed the amount of polymer.
The amount of polymer can be adjusted to change the rate of biodegradation.
Water was removed by lyophilization and the amount of polymer eroded was measured gravimetrically.
The amount of polymer formed can be determined in either of two ways.
It is also possible to reduce the amount of polymer material by using filler material.
The amount of polymer present on the silica was calculated by carbon analysis.
It was found that it increases monotonously with the total amount of polymer deposited.
The amount of polymer should be such that it allows a disintegrable stick to be obtained.
Activity of the catalyst was measured on the basis of the amount of polymer produced.
The amount of polymer added depends on the purpose for which it is used.
Catalyst efficiency is measured by the amount of polymer which results per weight catalyst.
The amount of polymer to be added varies depending of the properties of the furnish.
The examples according to the instant invention show a significant amount of polymer grafted monomer.
It may contain a minor amount of polymer particles having a small particle size.
The resulting mixture had a slight haze after the entire amount of polymer had been added.
The amount of polymer that becomes dissolved into the chemiluminescent solution.
Similarly, control could be optimized for the amount of polymer.
The amount of polymer to be added varies depending of the properties of the pulp.
Furthermore, it allows for a reduction in the amount of polymer needed.
A substantial amount of polymer powder was found at the bottom of the inlet chamber.
These amounts are defined as wt. % with respect to the amount of polymer and crosslinker.
Amount of polymer.
Catalyst activity is defined in this application to be the amount of polymer produced / g catalyst / h.
The remaining amount of polymer is composed of the further polymers mentioned above.
Partial pressure of the primary a-olefin is set according to the amount of polymer desired.
The amount of polymer preferably depends on the amount of dyestuffs contained in the composition.
After the three batches of polymerization, the amount of polymer scale deposition was measured.
The amount of polymer used may differ depending on the type of the polymer.
Accordingly, the volume of extractive solvent needed to remove a given amount of polymer is reduced.
A very small amount of polymer powder was found at the bottom of the inlet chamber.
The mechanical treatment was continued until only a minor amount of polymer gel-lumps remained.
The amount of polymer conjugate placed in solution to measure solubility can also vary greatly.
This small size, combined with a rather higher amount of polymer allows for an enhanced dissolution.
The amount of polymer is varied automatically during the batch dewatering on the filter press.
You'll also be interested in:
Examples of using Amount
Show more
A small amount of depth of cut can be obtained by
It is obscene to spend that amount of money on a mattress
The amount of these risks is insignificant individually
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
