Examples of 'amplifi' in a sentence
Meaning of "amplifi"
amplifi (adjective) - used to describe something that has been made louder, stronger, or more pronounced, often in reference to sound or signals
How to use "amplifi" in a sentence
Basic
Advanced
amplifi
Amplifi er is very hot thermal protection is engaged.
Mm jack output for amplifi ers or earphones.
The amplifi er must be in a running design to operate.
Control the volume on the connected amplifi er.
The amplifi er channel has stopped operating.
Be sure that no cables are connected to the amplifi er.
A power amplifi er used to drive a passive subwoofer.
Indicates the output level of the amplifi er.
A red light means the amplifi er is in standby mode.
Indicates clip events reported by the amplifi er.
Amplifi er damage is not covered by warranty.
This connection is only for amplifi ers.
Set the amplifi er inputs to parallel or monaural operation.
Connect the loudspeakers directly to the amplifi er.
This product is a power amplifi er that produces heat.
See also
Amplifi ers do not create energy.
The swimming bladder serves as an amplifi er in some fi sh.
The amplifi er automatically switches on if a music signal is received.
Rack mounting of the amplifi er is optional.
The amplifi er is set to bridge mono.
Vibrations could damage internal components of the amplifi er.
The amplifi er automatically goes to protection mode while overheating.
Connecting a digital amplifi er via the optical port.
An overamplifi ed signal has been transmitted to the amplifi er input.
Connecting your tuner to your amplifi er.
At least four amplifi er channels are needed.
The light indicates the status of the amplifi er.
Digital amplifi er via coaxial connection.
Clarion does not recommend mounting an amplifi er to a subwoofer enclosure.
Replace the amplifi er and secure with adequate hardware.
There is a short on the amplifi er output.
The keypad and amplifi er connection is explained in said manual.
Both coils must be connected to a source of amplifi cation.
Check to see if your amplifi er is optimized to drive this load.
Turn down the level controls of the amplifi er.
The performance of an amplifi er can only be as good as its installation.
This section describes how to operate your amplifi er.
Rack for mounting amplifi er or a stable surface for stacking.
Trol to minimum and switch off the amplifi er.
Do not operate the amplifi er with less than the.
Control to minimum and switch off the amplifi er.
This amplifi er is equipped with a preamp for audiophile turntables.
Route the wires from the amplifi er to the speakers.
The amplifi er generates heat as part of its normal operation.
Cable between computer and amplifi er is broken or not connected.
The amplifi er is not plugged into the power receptacle.
Stereo mode is the typical way of using the amplifi er.
The amplifi er starts in the state it was in when power was removed.
Check the switch settings on the back of the amplifi er.
Turn on the amplifi er and select the program source.
