Examples of 'amplifier channels' in a sentence
Meaning of "amplifier channels"
Amplifier channels refer to the different audio channels or inputs that an amplifier can accommodate. Each channel corresponds to a separate audio signal that can be amplified and played through the speakers connected to the amplifier
How to use "amplifier channels" in a sentence
Basic
Advanced
amplifier channels
Connection of two additional main amplifier channels.
Two separate amplifier channels are used to drive the speaker.
Each set of speakers in the car have their own amplifier channels.
For this purpose both amplifier channels are combined to one mono amplifier.
Repeat this procedure for connecting all remaining speakers to the appropriate amplifier channels.
X high power amplifier channels for the subwoofer and the main speakers.
There is an RCA input for each of the two amplifier channels.
At least two amplifier channels are needed for stereo operation only one channel is shown.
Mono splits mono input into both DSP or amplifier channels.
At least four amplifier channels are needed for stereo operation only two channels are shown.
There is an RCA input for each of the five amplifier channels.
The configuration of power amplifier channels is stored nonvolatile in the Remote Control Module.
Are two RCA inputs for each of the six pair of amplifier channels.
The amplifier channels LEFT and RIGHT are equipped with a high pass filter in each case.
There are two RCA inputs for each of the four pairs of amplifier channels.
See also
Bi-amping using two amplifier channels per speaker.
There are two RCA inputs for each of the three pairs of amplifier channels.
For this purpose, both amplifier channels are combined to a mono amplifier.
There are two RCA inputs for each of the four pair of amplifier channels.
Bridged amplifier channels can only drive 4 ohm minimum impedance speakers.
The speaker is connected to both Left and Right amplifier channels.
In the bridge mode, the two amplifier channels are combined to a mono amplifier.
It was a hybrid three-way design with two internal amplifier channels.
For this purpose, the two amplifier channels are combined to a mono amplifier.
Preferably, the signal reference is common for all amplifier channels.
The former is preferable, when the amplifier channels are for signals collected by similar probes.
Volume control, one each for the left and right amplifier channels.
In Stereo mode, each one of the amplifier channels works independently from the other.
Int and Ext Level Controls, Sets the volume of the associated amplifier channels.
In PARALLEL mode both amplifier channels run together driven by Channel 1 input.
When these blue LEDs lit, it shows that both amplifier channels are ready.
Bridged amplifier channels can only drive a 4-ohm minimum impedance load.
Bi-amping requires the use of two amplifier channels per speaker.
Power amplifier channels behave as described in chapter 2.7.
In the position STEREO or NORMAL, the amplifier channels operate separately.
The RMB-1076 has three groups of speaker connectors, one for each pair of amplifier channels.
These differ in the number of amplifier channels per frame, one, two, four, or eight.
Stereo mode, Conventional 2-channel stereo operation for a pair of amplifier channels.
Available as Patchliner Quattro or Octo - 4 or 8 amplifier channels.
The RMB-1076 has two pair of color coded connections for each group of amplifier channels.
You'll also be interested in:
Examples of using Amplifier
Show more
Make sure that the amplifier is switched on
Amplifier is picking up alternator noise or radiated noise
Never operate the amplifier without cover
Examples of using Channels
Show more
Strengthening of channels of communication in the defence field
The units may be set to different channels
And all the channels a hotel has
