Examples of 'amplifier has' in a sentence
Meaning of "amplifier has"
amplifier has: Refers to the device or component that increases the amplitude or power of a signal. It is commonly used in audio equipment to enhance sound quality and volume
How to use "amplifier has" in a sentence
Basic
Advanced
amplifier has
The amplifier has a set of preamp outputs.
An ideal operational amplifier has been assumed.
The amplifier has been turned off manually.
The protective device on the amplifier has been activated.
The amplifier has been subject to heavy impact.
Always check that the amplifier has a good earth.
The amplifier has two modes of operating.
This charge transfer amplifier has a very high gain.
The amplifier has constant voltage gain.
A cinch cable connected recorder or amplifier has come loose.
The power amplifier has to be protected against.
This indicator lights when the power amplifier has been switched on.
Each amplifier has two differential outputs.
Make sure the volume on the amplifier has been turned up properly.
Your amplifier has been designed and manufactured to exacting.
See also
First check whether your amplifier has a subwoofer output jack.
The amplifier has no separate power switch thus.
Next check whether your amplifier has line output jacks.
The amplifier has a limiter to protect the speaker.
This can also happen if the amplifier has an internal problem.
The amplifier has not been turned on.
Be sure the tape monitor system of the amplifier has not been activated.
The amplifier has a very high current consumption.
The power supply is not connected or the amplifier has a blown fuse.
Such an amplifier has several limitations.
After a moment the LEDs will return indicating the amplifier has been reset.
The power amplifier has two fans.
The charging station is supplied with power even when the amplifier has been switched off.
The first amplifier has an output.
The POWER indication LED indicates that the amplifier has been turned on.
The amplifier has reached the maximum operational temperature.
But as described in the AYASLI publication the amplifier has certain disadvantages.
If your amplifier has two sets of speaker output terminals.
A screen to confirm whether the amplifier has an IR In jack appears.
Each amplifier has its own individual serial number.
Blue LED illuminates when the amplifier has been turned on and has power.
Each amplifier has one input and one output.
The PROTECT LED will stay on if the amplifier has overheated.
When your amplifier has two sets of speaker terminals.
Now we assume that the Operational Amplifier has high input impedance.
When your amplifier has one set of speaker terminals.
The protect LED Illuminates red when the amplifier has gone into protection mode.
Each amplifier has it own limiter to prevent distortion caused by clipping.
Perfect if your Audio Amplifier has too few digital audio.
The amplifier has two pair of speaker outputs on the back.
Check if the MUTE function of the TV or Amplifier has been activated.
This amplifier has a discrete amplifier used exclusively to drive headphones.
Symptom CauSe Solution Bass sounds distorted Subwoofer amplifier has.
Your amplifier has been thoroughly tested before leaving the factory.
Only use the switches when the amplifier has been switched off!
You'll also be interested in:
Examples of using Amplifier
Show more
Make sure that the amplifier is switched on
Amplifier is picking up alternator noise or radiated noise
Never operate the amplifier without cover
Examples of using Has
Show more
She has the baby with her
The incarceration system has been described as follows
It has signed or ratified the following instruments
