Examples of 'amplifier should' in a sentence
Meaning of "amplifier should"
amplifier should: This phrase suggests that there is a recommended or expected action or behavior related to an amplifier. It implies that someone is providing advice, instruction, or guidance on how an amplifier should be used, adjusted, or operated in order to achieve optimal performance or desired results
How to use "amplifier should" in a sentence
Basic
Advanced
amplifier should
An of the logarithmic amplifier should be arranged in cascade.
Amplifier should be used.
The car HiFi power amplifier should be as short as possible.
Finally, let us recommend you our T echnical Services whenever the amplifier should be repaired.
Your amplifier should turn on only when ignition is activated.
The input signal of the amplifier should have line level.
The power amplifier should be mounted electrically insulated from the car chassis.
Thus when operating at a different frequency the amplifier should be optimised at that frequency.
The amplifier should be secured to a solid mounting surface using proper mounting hardware.
Speakers to be connected to the amplifier should conform with the standards listed below.
The amplifier should work again properly after you have solved the problems.
The level control of any car amplifier should not be mistaken for a volume control.
The amplifier should be carefully designed and compensated with relatively high value capacitors.
The IR indicator on the amplifier should now be it.
The connected amplifier should be able to decode its DOLBY DIGITAL and MPEG formats.
See also
The IR indicator in the amplifier should now be lit.
The amplifier should be capable of driving 4 ohm loads.
The green OPERATING LED of the amplifier should light up.
The amplifier should preferentially be used with switched-on filters.
The rear channel of the amplifier should have a low-pass crossover.
The amplifier should not be mounted on a strongly vibrating part or surface e.g. subwoofer enclosure.
Thus, a relatively simplified form of amplifier should be used that comprises a minimum of transistors.
The amplifier should be mounted to a solid surface that will ensure a vibration-free mount.
The " clip " indicators of the connected power amplifier should never stay permanently lit.
A hi-fi amplifier should not normally ever be driven into clipping.
The green OPERATING LED of the amplifier should light-up.
If your Jensen amplifier should ever require service, you will need the original dated receipt.
When using a cable with length of more than 100m an antenna amplifier should be used.
All devices connected to the amplifier should be plugged into the same multiple socket outlet.
The minimum distance to the second required antenna amplifier should be 0.5 to 1 m.
The set-up on your amplifier should be carried out as follows.
After turning-on the head-unit, the mode / operating LED of the power amplifier should light-up green.
RF output level of the amplifier should be set after half an hour of warm-up.
In the same way, the frequency range, within which the amplifier should work, is controlled.
Thus, the cable television amplifier should also be provided with protection against ESD pulses.
The amplifier should have an earth connection in good conditions earth resistance, Rg=30Ω or less.
The intercom Volume Control in the Amplifier should be set about 1/3 of its rotation.
What size amplifier should I use?
What sort of amplifier should I buy?
Specifically, a pulsed RF amplifier should behave as closely to [… ].
You'll also be interested in:
Examples of using Amplifier
Show more
Make sure that the amplifier is switched on
Amplifier is picking up alternator noise or radiated noise
Never operate the amplifier without cover
