Examples of 'angle of taper' in a sentence
Meaning of "angle of taper"
angle of taper: Refers to the degree of incline or slope at which a surface narrows or reduces in width. This phrase is commonly used in carpentry, metalworking, and engineering to specify the tapering angle of a surface
How to use "angle of taper" in a sentence
Basic
Advanced
angle of taper
Sets an angle of taper for an extrusion.
It is the tallest spire in the country to have such a narrow angle of taper.
Angle of taper for extrusion.
The deceleration is varied by varying the angle of taper of the needle end.
Angle of taper of striker.
They will tolerate some variation in angle of taper and diameter of the pots.
The control valve and the valve housings may not have any angle of taper.
Also, the angle of taper of the conical part is rather large.
This rotation produces a controllable, circular, symmetric angle of taper in the exposed photoresist.
Preferably, the angle of taper varies over the length of the sealing surface.
In the particular example shown in the drawings, such angle of taper A is 20 degrees.
The angle of taper X preferably varies over the length of at least the sealing surface 44.
The electrode of claim 1 wherein an angle of taper of the tang comprises at least 9 °.
The angle of taper is typically less than 5 °.
As shown, aperture 64 has a constant angle of taper.
See also
The angle of taper is non-limiting.
The electrode of claim 9 wherein the angle of taper comprises at least 15 °.
The angle of taper of the conical shoulder and conical surface is approximately 45 °.
In one embodiment, the angle of taper A is about 6 degrees.
The angle of taper a is shown schematically in Fig . 2.
According to some embodiments, the angle of taper is between about 10 and 60 degrees.
The angle of taper is preferably less than 30 °.
A cable splice according to claim 3, wherein the angle of taper is less than 30 °.
To be effective the angle of taper of the cavity should be about 3 °.
In particular, the front edge 42 of the luggage board has an angle of taper of 3 °.
As indicated, the angle of taper C for the noted fastener was around 7 °.
An insulating wall according to claim 1, characterized in that the angle of taper is 5,37 degrees.
The angle of taper of the head portion 3 is 4 °.
A suitable angle of taper of the metering edge 19 is approximately 2 °.
The angle of taper is about 4 °.
The angle of taper with respect to the longitudinal axis of the bobbin 130 being 15 degrees.
This angle of taper A may be in the range of about 10 degrees to about 30 degrees.
