Examples of 'anti-reflection' in a sentence
Meaning of "anti-reflection"
Anti-reflection is an adjective used to describe surfaces or coatings that reduce reflection, typically in optical devices like lenses or windows
How to use "anti-reflection" in a sentence
Basic
Advanced
anti-reflection
An anti-reflection coating may be added as well.
Mm extra clear glass with anti-reflection.
The anti-reflection is obtained by vacuum deposition.
The lens is typically not anti-reflection coated.
An anti-reflection effect was thereby provided.
It acts as a selective spin anti-reflection layer as described above.
An anti-reflection coating may be used to reduce reflection.
These means are in particular an anti-reflection layer of known composition.
This anti-reflection film is provided on a plastic substrate.
The sapphire glass has anti-reflection on the inside.
An anti-reflection coating of sputtered aluminium oxyfluoride material is mentioned.
Even some old CRTs had anti-reflection coatings.
The anti-reflection studies and piste construction details were explained.
Positive image is thus a very effective anti-reflection measure.
More than one anti-reflection layer may be deposited.
See also
It is therefore relatively difficult to obtain good anti-reflection coatings.
Several anti-reflection solutions were employed to ameliorate this problem.
Sapphire crystal sides and back with anti-reflection treatment.
The anti-reflection coatings also help in producing bright images.
The protective layer may also have anti-reflection characteristics.
Anti-reflection lens coatings also reduce flare and ghosting.
It is no longer necessary to deposit an anti-reflection layer inside the mask.
Anti-reflection optical article and process of producing the same.
These supports are obtained by multilayer stacks called anti-reflection treatments.
A suitable anti-reflection coating will comprise of a layer of porous silica.
The injection molded lens elements are typically anti-reflection coated.
The deposition of an anti-reflection coating on the passivation layer ; and finally.
With a higher index of refraction a better anti-reflection layer is obtained.
Preferably, an anti-reflection coating should be applied onto the collection lens.
Four films may in fact be sufficient to obtain a remarkable anti-reflection effect.
Using a mirror and an anti-reflection layer has for example been proposed.
Anti-reflection coatings can be used on the top surface of the cell.
The screen is covered with anti-reflection coating which is a nice addition.
The anti-reflection property prevents incident light emerging from the surface.
This material must also be anti-reflection coated for the laser wavelength.
Anti-reflection coatings applied to the facets may be used to minimise the ripple.
It also has magnesium fluoride and calcium fluoride coatings for anti-reflection.
The areas where the anti-reflection stack was delaminated appeared luminous.
The inlet window may optionally be fitted with an anti-reflection plane side.
In addition, the anti-reflection coating only works on the surface to which it is applied.
The lens system is made of synthesized quartz coated with anti-reflection material.
The thickness of anti-reflection coatings is suited to the wavelength of the appropriate light.
The reflection from all three interfaces produces destructive interference and anti-reflection.
Tive absorption and anti-reflection are also of very low cost compared to.
The porosity thus produced in the layer is the source of the anti-reflection property.
The presence of this anti-reflection layer greatly attenuates the amplitude of the oscillations.
This tuning is well known by people skilled in the art of anti-reflection coating deposition.
Examples of an anti-reflection coating having this configuration may thus be stacks of the type,.
The method according to any of the preceding claims, comprising forming an anti-reflection coating.
The faces on which the anti-reflection deposition takes place are generally cleaved faces.
