Examples of 'applied stress' in a sentence
Meaning of "applied stress"
applied stress: Describes the act of putting pressure or strain on something, either physically or metaphorically. It could refer to the force applied to an object to test its strength or the impact of challenging situations on a person
How to use "applied stress" in a sentence
Basic
Advanced
applied stress
Smaller than that in the direction of applied stress.
It determines the maximum applied stress to each component in the system.
A fluid whose viscosity is variable based upon applied stress.
C is the applied stress.
This variation in frequency is thus an image of the applied stress.
The applied stress values were related to what may occur industrially.
Releasing said applied stress.
It was found that swelling strain reductions are nonlinearly dependent on applied stress.
The applied stress.
The time to rupture is recorded as a function of the applied stress.
The value of the applied stress depends on the testing temperature.
Is directly proportional to the applied force or the applied stress.
The applied stress was calculated by the strain of the monitored strain gauge.
The grain size is known to decrease as the applied stress is increased.
The applied stress caused a measurable difference in passive film growth kinetics and its thickness.
See also
Plastic deformation is retained after the release of the applied stress.
Strain in the direction of Applied stress is known as longitudinal stress.
The emergency device then acts as an abutment against applied stress.
When the IDT methodology is applied stress levels throughout the population are reduced.
The distribution of residual stress is different from the applied stress.
The applied stress is based on the unnotched cross-sectional área.
Molecules are immobile and the plastic responds to rapidly applied stress by fracturing.
The greater the applied stress range, the shorter the life.
This variation in resonance frequency or in amplitude allows the applied stress to be measured.
When the applied stress is removed, yield stress materials may become solid again.
The change in inductance normalized by permeability was plotted versus the applied stress.
These three operations are characterized by the applied stress and the climatic conditions.
The reorientation of the molecular chains occurs in the direction of the applied stress.
Young 's Modulus is the ratio of applied stress to strain in the elastic region.
Syneresis is the separation of oil from the gel under applied stress.
The applied stress resulted in a sinusoidal response as measured with the Eddyscope ™.
The variants which are most favorably oriented to the applied stress will grow.
When the applied stress falls below σy, a fluidized YSM solidifies again.
This effect is based on the change in permeability of ferromagnetic material under applied stress.
The ultimate stress described above relates to the applied stress at which the composite fails.
The latter employ lasers to reveal target deformation and translation responses to an applied stress.
Cell formation and tissue distention try to accommodate applied stress over time, increasing tissue área.
Above the glass transition temperature viscous deformation will occur in response to an applied stress.
Yield stress materials ( YSMs ) are solids when applied stress is below the yield stress, σy.
For instance, fatigue is a weakening of a material due to repetitive applied stress.
FIG . 5 is an exemplary curve of applied stress versus strain for a waterblocking material ;.
Figure 2 represents the transformation cycle without applied stress.
Figure 4 is a plot of applied stress against % elongation for samples of Example II . EXAMPLE 1.
The magnetic permeability of the core 84 changes in response to an applied stress.
F · σ where a = maximum applied stress f = section factor.
Strength, a measure of how well a material can resist an applied stress or load.
Sealing surface 304 reduces applied stress to the tubing 500 as compared to conventional flares.
In-situ electron and ion irradiations were conducted, with and without an applied stress.
The horizontal axis represents applied stress ( dyne/cm2 ) to the composition.
Figure 4 shows strain characteristics for skin for differing degrees of applied stress.
You'll also be interested in:
Examples of using Stress
Show more
Stress can trigger migraines quite easily
Very good for stress you know
Stress has always affected your hormones
Examples of using Applied
Show more
One caveat must be applied to this analysis
We applied three event history analysis methods
It may also be contested as applied in a certain investigation
