Examples of 'applying power' in a sentence
Meaning of "applying power"
applying power - This phrase refers to the act of using authority, influence, or force to achieve a particular goal or effect
How to use "applying power" in a sentence
Basic
Advanced
applying power
Replace terminal cover before applying power.
Before applying power.
Set the input jumper before applying power.
In the sense of applying power to a task - yes.
Close the housing securely before applying power.
Immediately after installing or applying power to the unit, it should be initialized.
To rotate the pedals without actually applying power.
The switching circuit is capable of applying power independently to each of the heaters.
The position of the encoder is available immediately on applying power.
Replace all covers before applying power to the Drive.
Allow the detector to stabilize to room temperature before applying power.
Applying power and test signals to the printed circuit, and.
And immediately following applying power.
A switch for selectively applying power from said power supply to said pump ;.
System operation within a few minutes after applying power.
See also
Still further, applying power to a circuit on a chip during testing can present serious problems.
Inspect wiring and ensure connections are correct before applying power.
Before applying power to a fixture, check that the source voltage matches the fixture 's requirement.
Manually spin the fan blade to ensure it rotates freely before applying power.
Before applying power to the unit for the first time, check for the following conditions.
The vessel is heated at the desired rate by applying power to the heating coil.
After applying power to the main unit, the front Standby LED indicator lights on.
Trams were traditionally operated with separate levers for applying power and brakes.
Applying Power to the Detector Two light emitting diodes ( LEDs ) are visible through the window.
Be sure to remove all packing materials the oven from unit prior to applying power.
The alternator master activates the alternator by applying power to the alternator field circuit.
Replace and tighten the cover to the wiring compartment of the transmitter before applying power.
Wait for 3 minutes after applying power supply Master and Slave Outdoor unit, Indoor unit.
Double-check for proper orientation before applying power.
Upon applying power to the system, the initialization state at 60 is entered.
Double-check for proper connections before applying power.
The method includes applying power to the battery terminals, 152 and thus the electronic circuit system.
The electrodes 10 may be electrically connected to the liquid crystal layer for applying power thereto.
For example, ' actuation ' of a heater refers to applying power to the heater to realize heating.
The electrodes 10 are electrically connected to the electro-active element for applying power thereto.
IMPORTANT, Lock the blade before applying power to the saw.
You have only 15 seconds after applying power to the.
The reset interrupt is generated by applying power to the missile 18.
An initial step 341 is activated by applying power to the module 1.
You'll also be interested in:
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
Examples of using Applying
Show more
Not applying tools and techniques effectively
I hear that you are applying to schools now
Applying film and filter effects to photos
