Examples of 'arc current' in a sentence
Meaning of "arc current"
arc current - This phrase may refer to the flow of electric current across an electrical arc, which is characterized by a sustained electrical discharge between two conductive electrodes
How to use "arc current" in a sentence
Basic
Advanced
arc current
The amplitude of the arc current can be varied.
Marking depth and width adjustable by arc current.
Arc current of a protector.
The branching is promoted by the high arc current.
Then the arc current is dropped to a low level to reduce spatter.
This was done by merely increasing the arc current until the short circuit was cleared.
The inert gas acts as a buffer or means for limiting the arc current.
It is also possible to limit the arc current for a given torch operating power.
This is the product of the sensed arc voltage and the sensed arc current.
The ballast attempts to maintain a constant arc current by adjusting the duty cycle.
By increasing the arc current the total ion current increases and the deposition rate increases.
A circuit activated at the end of a pulse plunges the arc current to assure a short circuit.
The arc current generates Lorentz forces which have an important role in the welding process.
The same arc coating sources and arc current values were used for all processes.
This signal La is representative of the instantaneous arc current.
See also
Average Current indicates the average arc current measured during the weld process.
Arc current through a gas-discharge protector.
Preferably, the second energy source acts to increase arc current.
Traditionally, a large resistor in the pilot arc current path created this voltage potential.
As a result, the arc current for a given wattage increases and the operating voltage decreases.
Normally, said distance is adjusted, seeking to maintain the arc current constant.
In that case, the HF arc current will decrease and will eventually extinguish.
A first sensor senses the actual arc voltage, while a second sensor senses the actual arc current.
The electric arc current I and the voltage V which results therefrom ;.
Figure 16 shows a plot of light output versus arc current.
This corresponds to an arc current of approximately 25 mA.
Arc current levels, for example, control weld penetrations.
This feedback voltage is representative of the arc current through wire 40.
The arc current at the same time is increased to 35 amps.
This amplifier receives a voltage from current shunt 208 that is proportional to the actual arc current.
The arc current intensity is higher at low-voltage ( double or more ).
FIGURE 1B illustrates the relationship between arc current and arc voltage where the factor k is 1.0.
Instead the arc current flows through the copper casing 44, the path of least resistance.
In one embodiment of the invention the arc current is at least 800 A.
Preferably the arc current that generates the arc plasma is at least 400 A per plate-shaped target.
In a like manner, shunt 44 produces a voltage in line 42 which is the instantaneous arc current.
In one embodiment of the invention the arc current is at least 800 A per plate-shaped target.
The arc current is varied by the regulator ( 7 ).
Figure 15 shows a plot of arc voltage versus arc current for a 32 watt Osram / Sylvania compact fluorescent lamp.
An arc current of 100A was applied for film forming.
The blown or pilot arc current is 85 amperes.
The arc current causes a substantially instantaneous voltage drop, shown at 18 in FIG . 5.
Input line 184 is the instantaneous arc current in the welding operation as sensed by shunt 60.
The arc current varied from 20 to 25 A and was passed intermittently for several hours.
An apparatus 20 for measuring the arc current La, arranged in the connection 6 ;.
You'll also be interested in:
Examples of using Current
Show more
The current national legislation on adoptions states
To temporarily alter the current programmed temperature
Current prosecutions of the crime of abduction of minors
Examples of using Arc
Show more
A plasma arc can damage frozen pipes
Allows you to obtain different arc dynamics
Arc voltage too low or too high
