Examples of 'are held in position' in a sentence
Meaning of "are held in position"
Are held in position: This phrase indicates that something or someone is kept or maintained in a specific place or role
How to use "are held in position" in a sentence
Basic
Advanced
are held in position
They are held in position by their upper end.
Without this user action, the tweezers are held in position.
The side walls are held in position by a number of spacers.
In the event of a power failure or emergency stop, they are held in position.
The sliding bottoms are held in position by friction.
Spring collar surrounding the half-shells to ensure that they are held in position.
It is as if the diamonds are held in position by the interface layer.
The input fibres 10 rest on a support ( not shown ) so that they are held in position.
The contacts are held in position when the slider is closed.
As mentioned earlier, the frame receives connections which are held in position by glass beads.
The plungers are held in position by a cap retainer described below.
When pushed into structure 68 the fibres 72 and 62 are held in position to permit evanescent coupling.
The pipes are held in position while the sleeve is gripped by rotational equipment.
In fact, in this case the contacts are held in position elastically only.
These layers are held in position around the panel 28 by the other garment components.
See also
The dual tool retainer pins are held in position using a robust cover plate.
They are held in position by the spigot portion 38 on each second part 36.
In normal operation, they are held in position by the control system.
The coils are held in position relative to one another by a tie ring 16.
Therefore the segments 20 are held in position and form a single assembly.
The springs are held in position by an adjustable nut 18 having an end portion 180.
The individual segments are held in position with respect to each by a flexible joint.
The latter are held in position owing to the partition wall 13.
All the activated reels are held in position until the bonus game is activated.
The blocks 7 are held in position on their respective runner 42 by the beam 43.
The two half-shells are held in position by means of a spring collar.
The supports 3, 4 are held in position by inclined guide ropes 5 attached to ground engaging pegs 6.
The stiffening members are held in position and slidably guided due to the hooks 37.
The plates are held in position on support member 60 and include stops 61 and operating shaft 62.
The connection elements 15 are held in position by the resilient clip elements.
The supports 2 are held in position by ground engaging metal supports 4.
The threaded rods are held in position by jam nuts 632.
The frame and cushion are held in position on the patient 's face by a headgear assembly.
Bottles not accessed are held in position by the apertures 56 in the cover.
The fusehead leads are held in position using the grub screws see Figure A7.3.
Vertical cables 50 are held in position at the anchor point 51.
The electrodes 6 and 14 are held in position by two insulating supports 7 and 8.
Bottles not removed are held in position by the apertures 56 and the main panel 22.
You'll also be interested in:
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
Examples of using Held
Show more
Regular meetings were held in all the sectors
Was held up this morning shortly after opening
Informal consultations are held prior to formal deliberations
