Examples of 'are latched' in a sentence
Meaning of "are latched"
are latched: Term describing when something is securely fastened or closed by a latch. It is often used when referring to doors, gates, or windows
How to use "are latched" in a sentence
Basic
Advanced
are latched
All access doors are latched securely.
Make sure the tabs on the bottom of the tank are latched.
The outputs are latched so that they retain their status until the next updating.
Make sure all the doors are locked and the windows are latched.
The problem arises when high impedance nodes are latched to provide a comparison signal.
The ends of the overpack are capped and the overpack sections are latched.
The two connectors are latched both with the coupling sleeve and with one another.
This ensures there is no substantial gap between the sliders when they are latched.
Addresses and data are latched on the rising edge of the WE pulse.
Make sure that the locking mechanisms for the folding system are latched before use.
POV cams are latched in place.
Consequently, the cradle and cradle release mount are latched.
Therefore, the data of a packet are latched in IQ for a longer time than the header.
In accordance with other characteristics, the protecting end and the ring are latched.
In the fourth ratio, both valve spools are latched in the shifted position.
See also
The plate thus limits forward displacement of the terminals 13 once the fingers are latched.
When the button is released, the ball bearings are latched in their extended positions.
The thresholds are latched in the threshold register 256 by a third control signal from the microprocessor 210.
Configuration jumper JP14 determines whether or not commands are latched in the CIM logic.
Window profiles, which are latched to the box . But here we must accurately.
Please ensure that the kneading hooks ( 3 ) are latched in securely.
The various contacts 2 are latched in their inserted position 14, as also shown in Figure 14.
When open, the valves are latched open.
The signals D1/Dn are latched when the output signal E1 of the decision circuit D goes high ( 1 ).
Current contents of the counter 868 are latched in the AMZ register.
When the RAS signal falls, the address signals A0 - A8 ( indicating the row address ) are latched.
When installed, the seats are latched to floor-mounted strikers.
When the signal INT goes " low ", the contents are latched.
The latching protrusions 62 are latched to the latching step portions 61.
Those ranging packets are latched into the FIFO 206.
You'll also be interested in:
Examples of using Latched
Show more
I latched them together with my own hair
I can barely get latched on to those tits
You latched on like a goddamn pit bull
