Examples of 'are machined' in a sentence
Meaning of "are machined"
are machined: Indicates that something has been produced or manufactured using a machine or machining process. It suggests precision and mechanical production
How to use "are machined" in a sentence
Basic
Advanced
are machined
The seats are machined in the valve body.
The magnets of the first type are machined.
All these parts are machined to fit perfectly.
Unbalances often occur when asymmetric workpieces are machined.
These tubes are machined to one hundredth of a millimeter.
It is often used in woodworking or where softer materials are machined.
Our products are machined and finished by hand.
The fins on the newer engines are machined.
Impellers are machined to maximize volume and pressure.
On customer demand products are machined.
The markers are machined in this abradable material.
Two series of holes are machined.
The surfaces are machined parallel and square.
Measurement is also possible if only noncircular profiles are machined on the machine.
Those slots are machined typically in a rectangular shape.
See also
The circumference and front of each shaft are machined in one clamping.
All parts are machined to exacting tolerances.
Preferably this and the other disclosed fusión cages disclosed are machined.
All parts are machined from billet.
This method should also be used when soft materials such as plastics are machined.
Preferably two flats are machined parallel to one another.
Make sure to safely hold and guide all workpieces when they are machined.
The protruding parts are machined in order to obtain ribs.
Finally the necks are trimmed and the threads and port configurations are machined.
The bearings are machined in a steel block.
The shaft and plate are made from stainless steel and are machined to exact tolerance.
Such reinforcements are machined and are therefore expensive to manufacture.
Most adjustable pushrods for Shovelhead models are machined for this.
The caps are machined from brass and chrome plated.
This means that the front and rear faces are machined on a single machine.
Such strings are machined from a plate of metal or they are cast.
The internal surfaces exposed to the process medium are machined to a fine finish or polished.
Flats are machined around the bodies for a better grip.
Most new progressive lenses are machined using this technique.
The bars are machined out of thick compression molded sheets.
Apertures opening into the grooves are machined through the plate material.
Cavities are machined in the cylinder and arranged on a helix traced on the roll.
Two lateral pin openings are machined in the downcomer pipe.
The blades are machined in a continual spiralling movement with point contact from the tool.
Pulleys feature precision hobbed teeth and are machined to close tolerances for long service.
The covers are machined in a noble wood chosen specially and individually for each device.
The inner and outer portions of the cut rings are machined to obtain circular elements.
These elements are machined from stainless steel and their inner surface is polished.
Suitable shaped parts with the required dimensions are machined out of the ingots thus obtained.
Conventional sheaves are machined in a manner that results in transverse roughness on the contact surface.
O Manufacturing starts The components of the mould are machined.
The centring surfaces are machined by turning and are preferably ground.
Thus, two finished prescription lenses are machined.
Conventional bevel gears are machined with special machine tools.
Hip, knee and shoulder prostheses as well as dental implants are machined.
You'll also be interested in:
Examples of using Machined
Show more
The casting is machined in only one setup
Machined to a thousandth of a millimetre in a mathematically determined configuration
The seats are machined in the valve body
