Examples of 'askarel' in a sentence
Meaning of "askarel"
Askarel is a trade name for a type of synthetic insulating oil used in electrical equipment
Show more definitions
- A synthetic electrically insulating liquid which is nonflammable; when decomposed by an electric arc, the gaseous products also are nonflammable.
How to use "askarel" in a sentence
Basic
Advanced
askarel
All askarel capacitors are sealed in metal enclosures.
Stringent precautions must be observed when handling askarel.
The inventory for askarel in use continued to rise.
Askarel droplets may run down the casing.
O physical properties similar to properties of askarel.
O cost is lowest of all askarel substitutes and raw materials are plentiful.
The enclosure would have to rupture to spill askarel.
Askarel will drain or drip out to the level of the opening.
Other liquids should not be mixed with the askarel.
Used askarel does not usually have the same appearance as new askarel.
The fuel mixture consists of diesel fuel and askarel.
Contamination degrades the performance of askarel and clouds or darkens its appearance.
These transformers contained PCBs in the form of Askarel.
The remaining life expectancy of the askarel transformers is a key factor in this decision.
O Transformer overheats or burns out due to askarel loss.
See also
O Insulating quality of askarel liquid deteriorates.
The generic name for these fluids is Askarel.
Leakage of askarel Wet slickness and gummy residue.
The degree of hazard is similar to that of small askarel transformers.
The two askarel categories represent high concentration PCB liquids.
O Decrease in life expectancy and possible loss of askarel to the environment.
Expressed as Tonnes of Askarel Click image to view a full size version.
This is the technology of choice for high concentration PCB liquid wastes like askarel.
O Askarel represents the largest amount of PCBs in Canada on a pure PCB basis.
There are, however many fluids offered as substitutes for askarel.
Characterization of Net Askarel Waste Click image to view a full size version.
Those PCBs mixed with tri - and tetrachlorobenzenes were called askarel.
Characterization of Gross Askarel Wastes Click image to view a full size version.
Askarel transformers were designed as sealed units complete with pressure-relief vents.
O other PCB wastes The two askarel categories represent high concentration PCB liquids.
Excessive temperatures indicate that the transformer is overheating, possibly due to loss of askarel.
As the askarel expands, the pressure in this space increases.
A momentary burst of hydrogen chloride gas, askarel vapour and droplets occurs.
If a transformer 's askarel level falls significantly the unit should be thoroughly checked for leakage.
Table 1 lists the best known brands of askarel and their countries of origin.
Askarel is a trade name for the high-concentration PCB liquids used in transformers.
The inventory of in-storage askarel transformers is significant and will probably grow.
It is assumed that the average weight ratio of transformer casing to askarel is 2:1.
O The only approved method of destroying askarel is by high-temperature incineration.
Most Askarel Transformers do not require any make-up fluid for many years of service.
A switch having contacts that operate under oil ( or askarel or other suitable liquid ).
This inventory of askarel represents most of the PCBs, on a pure PCB basis, in Canada.
While still in the development stage the optimum fuel, askarel ratio has not been settled.
Reportedly, Askarel confirmed that among the dead are a policeman, another seven among the wounded.
The federal inventory of waste askarel in Ontario increased by 16 tonnes.
The two askarel categories represent high-concentration PCB liquids.
Figure N-3B indicates the changes noted in the net weights nationwide of in-use askarel.
TTCBs are fully compatible with askarel, since it is one of the components of askarel.
Askarel ( PCBs and PCTs ) liquid from transformers or other equipment or in bulk storage ;.
O other PCB wastes The two askarel categories represent high-concentration PCB liquids.
