Examples of 'attach the hose' in a sentence
Meaning of "attach the hose"
Attach the hose: This phrase is a directive that instructs someone to connect a hose to a relevant outlet or source. It is commonly used in contexts where the hose is a tool for transferring liquids or gases, such as in gardening, firefighting, or industrial processes
How to use "attach the hose" in a sentence
Basic
Advanced
attach the hose
Firmly attach the hose to avoid leaks.
All you need to do is attach the hose.
Do not attach the hose or tool to your body.
Use a flange to attach the hose.
Attach the hose to the accessory end of unit.
If not already installed, attach the hose to the compressor.
Attach the hose to the back of the pod.
The hose socket, which is where you attach the hose.
Attach the hose to the elbow.
For extended cleaning reach, you may attach the hose to the stair hose.
Attach the hose of the compressor to the tool.
Extend each end of the exhaust hose by about 8 cm and attach the hose.
Attach the hose to the fi tting on the side of the.
Why do not I just help you attach the hose to your exhaust and call it a day?
Attach the hose to the inlet of the trigger gun.
See also
Now, take your cylinders of carbon dioxide, attach the hose to the air hole.
Attach the hose to the structure to reduce the risk of.
Using a Philips screwdriver and the screw provided, attach the hose clip to the vacuum . Fig . 6.
Attach the hose to the manifold inlet nipple and.
Using the screwdriver and the screw provided, attach the hose clip to the vacuum . Fig . 5.
Attach the hose labeled hot to the hot water faucet.
Unplug the tool and attach the hose to the connector for the dust extraction device 8.
Attach the hose labeled cold to the cold water faucet.
Do not attach the hose or Nailer to your body.
Attach the hose coupler to the water port on your decks.
If necessary, attach the hose extension to vacuum in hard to reach places as follows.
Attach the hose to the external air connector using a hose.
To attach the hose disconnect the tool from the mains supply.
Attach the hose to the external air vent using a hose clip.
Attach the hose with the blue coupling to the cold water.
Attach the hose connector to the suction hose opening on the appliance.
Attach the hose hook at around the midpoint along the hose.
Attach the hose with the red coupling to the hot water faucet.
Attach the hose with the red stripe to the hot water faucet.
Attach the hose for the outgoing nutrient solution to the water pump.
Attach the hose with the red color indicator to the hot water faucet.
Attach the hose with the blue color indicator to the cold water faucet.
Attach the hose protector net to the hose section that goes into the skimmer.
Attach the hose coupler to the water port on the left of your deck surface.
Attach the hose fastenings to the suction hose and the telescopic suction tube.
Attach the hose to the external air connector with a hose clip to avoid using joints.
Attach the hose with the red color indicator to the Hot left.
Attach the hose coupler to the water port on the deck 's surface.
Attach the hose to the drainage nozzle, andsecure it with the hose clamp.
Attach the hose with the blue color indicator to the Cold ( right ) water inlet valve.
Attach the hose to the base of the spray gun Figure 10.
Attach the hose with the blue coupling to the COLD water ( left ) inlet valve.
Attach the hose with the red color indicator to the Hot ( left ) inlet valve.
Attach the hose connector ( 6 ) of the high-pressure hose to the water outlet 1.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Attach
Show more
Attach foot with right side pin
You will need to attach an external player
Attach foot with left side pin
