Examples of 'average hardness' in a sentence
Meaning of "average hardness"
average hardness: This phrase refers to the typical level of firmness or resistance exhibited by a material or substance. It implies that the hardness falls within the middle range when compared to other similar items
How to use "average hardness" in a sentence
Basic
Advanced
average hardness
The average hardness is obtained in a manner as follows.
It should be lower than the shoulders and have an average hardness.
The average hardness of the second phase is determined by the proportion of these phases.
The appliance is already programmed for average hardness 3.
The average hardness is calculated as a numeric average and depends on the number of tests.
EPMATHMARKEREP HVWM in Expression ( a ) indicates average hardness of the weld metal in Vickers hardness.
Water of average hardness and with neutral pH is good for the fish breeding.
A water softener must be installed for waters with average hardness above 10 f.
The average hardness may be measured before forming any film coating layer on the tablets.
Accordingly, it is preferable that the average hardness H of the ferrite satisfies the following Expression 3.
An average hardness was measured by the same method as in Test 1.
The hardness indicated is the average hardness of 10 tablets . EXAMPLES.
The average hardness is an average of 10 measurements.
As seen from Picture 10, water in the river has an average hardness.
From these six measurements, the average hardness value and standard deviation were calculated.
See also
Average hardness ( HV ) of weld metal was obtained in a manner as follows.
The tablets displayed an average hardness of about 20 kp and a nominal tablet weight of about 1 g.
Average hardness for the tungsten carbide is 70 HRC . ( Different compositions are available at customers request ).
After the coating the average hardness of the layer was measured at 75 HV30.
The average hardness of the segregated veins, by means of conventional Vickers type tests under 300 g.
Table 3 shows the average hardness and brittleness measurements for each of the three samples.
The average hardness results ( average values for 10 sticks ) are as follows,.
Figure 2 shows an average hardness value in HV30 indicated by " Mean P " in the figure.
You'll also be interested in:
Examples of using Average
Show more
Weighted average life of the repayment period
Just say you will not go average on me
Average freight and passenger wagon availability
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
