Examples of 'axial compression' in a sentence
Meaning of "axial compression"
Axial compression is a term used in engineering and structural mechanics to describe a type of load or force that acts along the axis of an object, such as a column or a beam. It refers to the compression or pushing together of the object's particles in the direction of its length, resulting in compression stress
How to use "axial compression" in a sentence
Basic
Advanced
axial compression
It provides no significant axial compression on the assembly.
Pure axial compression stress can be developed in this zone.
Sustained appreciable axial compression force.
Eccentric axial compression of the box introducing buckling.
The core is deformed by bending instead of by axial compression.
Radial and axial compression occurs after deployment.
The latter is systematically provided via an axial compression.
It usually uses axial compression to obtain radial sealing.
Flange couplings therefore undergo a high axial compression load.
Increasing the axial compression does not result in any improvement.
Protection of the chromatographic bed in dynamic axial compression chromatography devices.
Axial compression injury.
Heavily corrugated and capable of axial compression into fixed position.
Axial compression systems are chosen because of their simplicity and reliability.
Resistance in axial compression.
See also
These axial compression forces can reach a very high level.
This technique can not be used for tests in axial compression.
Acute axial compression.
Following treatment the ultimate failure load under axial compression was determined.
The axial compression process is a method of packing by the wet route.
The resultant flexible section is characterized by its axial compression or expansion stiffness.
Sports involving axial compression and flexion are typically associated with this injury.
Tests were conducted under various combinations of axial compression and biaxial bending moment.
Axial compression of the sealing element can be obtained by exerting a relatively small force.
Sealing is augmented by axial compression of the mold roll by the tie rods.
Because of the friction forces the greater part of the axial compression persists.
The results of the axial compression tests on blocks were higher than the estimated strengths.
Screw bolts are used to couple the assembly parts together under axial compression.
Flexible pipe having high resistance to axial compression and method of manufacturing such a pipe.
The axial compression force is the longitudinal force resulting from the internal overpressure.
The instability occurs as soon as the axial compression exceeds a level called the critical load.
By the axial compression the cylindrical body will expand radially both inwards and outwards.
This ratio will also be approximately the maximum axial compression the stent will allow.
Type A comprises axial compression fractures affecting the vertebral body.
The inclination may reduce the risk of the stent buckling under axial compression loads.
Axial compression due to the impact with the target ;.
Corrugated metal sheets tend to fail more easily under bending than under axial compression.
Immediately, the problems of axial compression loads and buckling limits are encountered.
In particular, it is more resistant to axial compression.
A progressive axial compression and bending action is thus exerted simultaneously on the preform 3a.
The sub-assembly is shown under slight axial compression loading.
However, no axial compression is undertaken and the can thus produced is unnecessarily heavy.
Such internal forces, however, can also be developed as a result of axial compression.
This form allows a strut to resist axial compression and a ( tie ) to resist axial tension.
The through-bolts are insulated, with the nuts maintaining the laminations in axial compression.
Finally, the container body is subjected to axial compression following the arrows 9.
Due to the axial compression the compressible part 4 will expand in the radial direction.
The spherical cap 58 may have an elasticity in axial compression to adjust said prestress.
The axially compressed traction tube 16 assumes a corrugated appearance as a result of the axial compression.
The spacer 16 preferably has good resistance to axial compression and good axial stiffness.
You'll also be interested in:
Examples of using Compression
Show more
Compression must take place before encryption
Provides engine compression braking at low speeds
Compression straps easily adjust to volume of content
Examples of using Axial
Show more
The axial sensor on the roof allows
There was an extreme rigidity of the axial musculature
Axial flow agitator with downward thrust
