Examples of 'axial forces' in a sentence
Meaning of "axial forces"
axial forces: This phrase is used in the context of mechanical engineering or physics to refer to forces that act along or parallel to the axis of an object or system. Axial forces can include tension, compression, or torsion, and are typically analyzed and considered in the design, analysis, or stability assessment of structures, machines, or mechanical components
How to use "axial forces" in a sentence
Basic
Advanced
axial forces
Design for bending and axial forces.
Diverting axial forces into the ball bearing.
For high radial and also axial forces.
Axial forces in a metalworking plant.
Concrete flanges subjected to axial forces.
This results in axial forces acting on the liner parts.
Precision gear for maximum radial and axial forces.
The objective is to reduce axial forces on the compressor wheel.
Axial forces mainly are caused by stacking packaged products in warehouses.
This bearing must therefore also withstand axial forces.
The control features apply axial forces to the linking structure.
The armors can be included and resist only to axial forces.
Dynamic guy fluctuations and axial forces in the mast were also investigated.
Motorcycle wheels are made to cope with radial and axial forces.
These axial forces generate a hysteresis effect in the operation of the pulley.
See also
Designed to accomodate radial and axial forces in both directions.
This provides a more stable structure that is less affected by axial forces.
Thus achieved is that minimal axial forces are exerted on the can wall.
Such axial forces are particularly problematic in low modulus homogeneous elastomeric jacket materials.
Said means for transmitting the axial forces is a shear pin.
The optimized output bearing has been designed for high radial and axial forces.
The means for determining axial forces may comprise a force transducer.
The compression reinforcement is then designed for the difference of the two axial forces.
An axial thrust bearing for accommodating the axial forces exerted on the brakepads.
The suspension entering the container is thus subjected to both tangential and axial forces.
Now we will explain the design axial forces for the following design situations.
Use of angular contact bearings increases the ability of absorbing radial and axial forces.
However the capacity to withstand axial forces depends on the degree of the contact angle.
It also needs to lock the pins very stably against the bending and axial forces.
In this case the radial and axial forces are accommodated in the said roller bearing.
Thereby, the bearing takes up both radial and axial forces.
The plug also distributes the axial forces on the chain pin to the module.
The axial forces that act upon the rotor during operation are,.
It will therefore be understood that these two axial forces balance each other out.
Iii Acting axial forces should be limited by the rule.
The engagement provides a lock that is strong against axial forces and consequently reliable.
If sufficient axial forces are exerted, the widening process can be omitted.
Standard bearings can not withstand any axial forces from the driven machine.
Hence, the axial forces acting on a planet gear are equal and opposite to one another.
The damper and yoke loads are mainly limited to axial forces and bending torque.
In other embodiments, the axial forces may be addressed hydraulic or contact bearings.
Compared to sleeves, that are not connected to the tube, axial forces are also allowed.
Such a bearing can absorb the axial forces produced by the compressor borne by the rotor.
Axial forces are not directed through the second barrel portion 48.
Therefore, bearings compensating axial forces are required.
The axial forces on the EAS - element must be observed.
Evaluating the result of the axial forces exerted on the rod ;.
These axial forces are absorbed by a sliding bearing ring 60.
In wind tunnel testing, the normal and axial forces are typically measured directly.
Axial forces acting on the rollers 6 are directly supported by the gears 4 and 5.
You'll also be interested in:
Examples of using Axial
Show more
The axial sensor on the roof allows
There was an extreme rigidity of the axial musculature
Axial flow agitator with downward thrust
Examples of using Forces
Show more
There are no external forces applied on the device
Forces nouvelles revenues from taxation of cocoa
The person who forces you is not me
