Examples of 'back-pressure' in a sentence
Meaning of "back-pressure"
back-pressure: Refers to a counterforce or resistance exerted in the opposite direction to the flow of something, such as fluids in a pipe or gases in an engine
How to use "back-pressure" in a sentence
Basic
Advanced
back-pressure
Location of exhaust back-pressure measuring point.
Back-pressure is typically measured either in psi or bar.
This is the start of a back-pressure effect.
The back-pressure element is arranged downstream in reference to the pump.
Requirements regarding exhaust back-pressure.
However other suitable back-pressure regulator systems are envisaged.
Requirements regarding noise and exhaust back-pressure.
Relax during a back-pressure point massage and then enjoy a.
Therefore it may also be called a back-pressure element.
Risk analysis in the back-pressure power plant of the chemical industry.
On the vertical axis plot your boiler back-pressure.
A nitrogen pad utilizing a back-pressure bubbler was applied to the reactor.
Reactor pressure was controlled by using a downstream back-pressure regulator.
Outlet steam pressure in the back-pressure turbine as low as technically feasible.
On the vertical axis figure out your boiler back-pressure.
See also
I quickly adjusted it to relieve the back-pressure and it began to flow freely again.
The flow restriction can comprise a regulating valve offering a back-pressure.
Reactor pressure was controlled with a back-pressure regulator in the reactor exit.
Electronic back-pressure regulator with sample bypass system ensures fast response.
Noise suppression equipment on a blast furnace back-pressure installation.
With an expansion nozzle, the back-pressure is proportional to the square of the throughflow.
The turbine in this case is called a back-pressure turbine.
A back-pressure regulator was used to control the pressure of the pyridine within the reactor.
A duct links the intermediate chamber to the back-pressure chamber.
A diaphragm based, back-pressure regulator mechanism is mounted in the regulator side ink accumulator chamber.
A duct connects the intermediate chamber to the back-pressure chamber.
In the extracorporeal experiment, the back-pressure determined the flow rate generated by a peristaltic pump.
The air intake is arranged upstream in reference to the back-pressure element.
A far from negligible consequence of this back-pressure is a substantial increase in the fuel consumption.
Vent piping should be installed as straight as possible to prevent back-pressure on the fans.
Elevating the hose may cause a back-pressure that could reduce brine draw during regenerations.
The equipment may include static mixing elements and back-pressure valves.
The back-pressure developed within the enclosure will tend to inhibit further leakage of exhaust gas.
Operating the flow limiting means increases back-pressure in the system.
This causes back-pressure to the kidneys and can lead to ARF.
The suspended piston also works as a back-pressure valve of the pump.
Inkjet print heads operate best at a slightly negative nozzle pressure or back-pressure.
Many approaches have been proposed to control the back-pressure in reciprocating printhead applications.
The directional control nozzle exit área regulates the engine back-pressure.
Many approaches have been proposed to control the back-pressure in reciprocating print head applications.
This means that their air pressure remains almost constant regardless of back-pressure.
However, a normal stroke with a significant back-pressure often did not have this falling edge.
Hence, the thickness h is preferably designed to increase for obtaining a resulting higher back-pressure.
This size represents a reasonable compromise between back-pressure at higher flows and at low flows.
The flow restriction can comprise a regulating spring biased valve offering an effective back-pressure.
A communication hole that communicates with the back-pressure space is formed in the second end plate.
The outlet from the apparatus is connected to a tube preferably provided with a back-pressure valve.
These cases are leak type with high back-pressure and air stroke with high back-pressure.
The constant flow rate is maintained as a silo is filled and the back-pressure increases.
Therefore, the pressure of the back-pressure chamber P is also controlled by the valve opening pressure.
