Examples of 'backing pad' in a sentence
Meaning of "backing pad"
backing pad ~ refers to a tool or material used as support behind an object, typically in the context of sanding or polishing
How to use "backing pad" in a sentence
Basic
Advanced
backing pad
Tighten the backing pad suffi ciently.
Do not exert side pressure on the backing pad.
Inspect backing pad before each use.
Engage the hexagonal hole in the backing pad o.
To install backing pad and sanding disc.
For tools which are equipped with a backing pad.
To remove backing pad and sanding disc.
Mounting and removing the rubber backing pad.
The rubber backing pad is available as an option.
Center the sanding disc on top of the backing pad.
Fitting the backing pad and sanding disc.
Select a suitable abrasive and secure it to the backing pad.
Sanding with the backing pad option.
Attach backing pad and sanding disc as shown.
Place the rubber backing pad onto the.
See also
The backing pad is tightened by hand.
Place the sanding sheet on the rubber backing pad.
Never mount a backing pad without a spacer washer.
Align and position sanding disk over backing pad.
Before attaching a backing pad be sure its maximum.
Place the sanding disc on the rubber backing pad.
The rubber backing pad is available as an optional accessory.
Sanding requires a special rubber backing pad available as an option.
Flexible backing pad with support flange and fixing flange.
Press the sanding disc against the backing pad as.
Mount the backing pad with abrasive disk as.
Your tool is equipped with an integrated backing pad damper ring.
Always mount backing pad when using sanding accessories.
Mount the fibre backed abrasive disc on the backing pad.
Mount the rubber backing pad onto the spindle.
Slip backing pad onto spindle with fl at side away from gear case.
Cover the rubber backing pad with the bonnet.
The backing pad can now be screwed onto the spindle and tightened.
Make sure that the backing pad is secured properly.
The backing pad here should have holes for suctioning adhesive dust.
Clean occasionally by brushing backing pad lightly with a small brush.
Use only the clamping nut supplied along with the backing pad.
Working with backing pad and sanding disc or brush.
The diamond paper needs to be mounted to the backing pad prior to use.
Place the rubber backing pad onto the spindle shaft.
Before each use inspect the accessory such as backing pad for cracks.
Then unscrew the backing pad while pressing the shaft lock.
Kickback is a sudden reaction to a snagged rotating backing pad or any other accessory.
Dust buildup on backing pad could cause sanding disc not to stick properly.
It is also suitable for sanding using a backing pad and sanding disc.
Place sanding disc on backing pad and secure assembly to spindle with disc nut.
Remove old sanding sheets by pulling them off the adhesive backing pad.
Then slide hook and loop backing pad onto spindle.
Check the backing pad or the wheel carefully for cracks or damage before operation.
The disc is intended for use on a backing pad in conventional manner.
You'll also be interested in:
Examples of using Pad
Show more
The pad has to be replaced in that case
Brake lining or brake pad method of attachment
Launch pad runs completely on internal power
Examples of using Backing
Show more
Tighten the backing pad suffi ciently
Backing plate has obvious traces of corrosion
Advertisers are backing out as they prefer digital
