Examples of 'backplate' in a sentence
Meaning of "backplate"
backplate (noun) - A backplate is a part of various objects, such as electronic devices or jewelry, that provides structural support or protection
Show more definitions
- A plate protecting a fighting person's back.
- A plate harnessed to a diver's back, to which the gas cylinders are attached.
- A metal plate on the rear of a computer's casing, used to cover a port or slot.
- A wood or metal (or glass, etc) plate that serves as a backing for an object.
How to use "backplate" in a sentence
Basic
Advanced
backplate
Place extractor on its backplate on a horizontal surface.
Left hip just forward of the backplate.
Push on backplate with thumbs while pulling.
The diaphragm is fused to a silicon or glass backplate.
The backplate is located on the top of the stabilizer.
The price include the lighten of backplate.
Reattach the backplate and propeller.
Aluminium frame brackets and backplate.
Metal backplate improves tool durability.
Place the motor on the backplate.
The backplate can not be removed.
Install discharge chute through opening in backplate and.
The backplate is made from polyester.
Keep the original motherboard backplate as it is.
The backplate is formed as a single piece.
See also
Tighten the screws until the backplate is secure.
Attachment of backplate to ventillation device and trolley face plate.
Secure the propeller to hold the backplate in position.
The backplate can now be released in the opposite side.
Align the retention mechanism and the backplate.
Secure keypad backplate to the wall using mounting holes.
This here is the port backplate.
Attachment of backplate to ventilation device and trolley face plate.
The card does not have a backplate.
Wings and backplate accessories.
Match and connect thermostat wires to proper terminals on backplate.
Use the level to mark the backplate mounting position.
The backplate and straps are padded for maximum comfort.
Both can be combined with a backplate or can be used alone.
A second backplate was then placed on top of the aluminum foil.
Wide between the spinner backplate and the cowl.
The backplate defined the rear of the cathode chamber.
Chladni patterns of a guitar backplate.
The backplate has a catch proximate a top of the backplate.
The separation chamber consists of a backplate and a front plate.
Each transducer comprises an individual diaphragm mounted on an individual backplate.
Screw the backplate of the sounder firmly to the mounting surface.
Motherboards are delivered without backplate.
Slide the spinner backplate and propeller on the engine shaft.
Do not connect the sounder to the backplate until later.
Secure backplate to the mounting surface using the screws provided.
Insert the discharge chute into the opening in the backplate.
Secure the keypad backplate to the wall in the desired location.
Pull the connection cables through the backplate of the sounder.
Remove backplate from the wall after all wires are labeled.
Dismount the two screws placed in the middle of the backplate.
Backplate is not included.
Appropriate earth ground is installed to the lug provided on enclosure backplate.
Backplate ballast system.
A screw must be installed in the tamper switch portion of the backplate.
