Examples of 'bail handle' in a sentence
Meaning of "bail handle"
bail handle - This phrase describes a type of handle or grip that is designed to be grasped or held for support, stability, or control, especially in situations where quick release or detachment may be necessary for safety or convenience. It is often used in reference to handles on doors, cabinets, tools, luggage, equipment, or other objects that require a secure yet easily accessible means of carrying, lifting, or moving
How to use "bail handle" in a sentence
Basic
Advanced
bail handle
Release bail handle to turn mower off.
Always operate this tool with the bail handle installed.
Be sure the bail handle or switch lever.
Do not operate the hedge trimmer without the bail handle attached.
The bail handle with your left hand.
Mower does not run when bail handle is activated.
The bail handle can be locked in four different positions.
The trimmer is shipped with the bail handle tied to the trimmer.
Remove bail handle by removing guard adjusting knob and hex.
Known hedge trimmers can have a front bail handle located near the blade assembly.
Be sure bail handle is not engaged while inserting safety key.
Mower doesnʼt run when bail handle A.
Position unless the bail handle is in the uppermost position.
A bail handle is provided for carrying the tool and for use as an additional handle.
Refer to Figure B for orientation of the bail handle.
See also
Release bail handle to turn mower off and unplug mower.
Before making any adjustments, release bail handle to turn mower.
Hold blade bail handle in place against handlebar with right hand.
To turn the mower off, just release the bail handle.
Release bail handle to turn mower off and remove the safety key.
It was made of galvanized tin, had three nesting compartments, and a bail handle.
Replace the bail handle with the bolt and the guard adjusting knob.
To turn the self drive off, release the self drive bail handle.
The bail handle typically surrounds the top and sides of the hedge trimmer.
Refer to Figure 2 for orientation of the bail handle.
Slide the bail handle onto the front of the trimmer housing behind the guard.
IF THE MOWER STALLS, be sure to release bail handle to turn mower off.
Release bail handle to turn mower off and stop the blade when crossing gravel surfaces.
Grasp trigger switch handle 7 and bail handle 6 firmly.
Assemble the bail handle in one of the positions shown in Figure E.
Wait for the blade to stop rotating (approximately 3 seconds) after releasing bail handle.
Be sure the bail handle is released, the.
The device 40 is shaped to receive the upper tie-plate bail handle.
Release bail handle to turn mower off, wait until the blade stops.
If you strike a foreign object, release bail handle or switch lever ( 2 ) to turn.
Be sure the bail handle is released, the blade has stopped and safety.
WARNING, never attempt to lock a switch or bail handle ( 2 ) in the on position.
This initial bail handle lifting is what causes the frangible elements 23e to fracture.
Grasp trigger switch handle ( H ) and bail handle ( F ) firmly.
Assemble the bail handle in either of the positions shown in Figure 3.
To operate the system, first grasp the bail handle G-1 and pull it to the handlebar G-2.
Ensure bail handle and switch lever are in “ off ” position.
Always release the bail handle or switch lever ( 2 ) to stop the motor.
NOTE, that sander bail handle can be adjusted to three different positions as previously discussed.
Release bail handle or switch lever ( 2 ) to turn mower.
You'll also be interested in:
Examples of using Bail
Show more
Remanded on bail with an electronic tagging order
Which is why we need a revocation of bail hearing
If you bail out on me then you know
Examples of using Handle
Show more
You can barely handle one woman
Handle circuit boards only by the edges
To reattach the handle on the opposite side
